The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Roll pans? (https://67-72chevytrucks.com/vboard/showthread.php?t=366271)

oklahomaduner 10-08-2009 10:31 AM

Roll pans?
 
Does anyone have roll pans on the front and/or rear of their trucks? I would really appreciate some pics if anyone had some!

Thanks!

markeb01 10-08-2009 01:33 PM

Re: Roll pans?
 
Here's a few pics of rear roll pans from a hobby website. Not coming up with anything on the front.

http://www.autohobbypage.com/cgi-bin...co/ggco340.jpg
http://www.autohobbypage.com/cgi-bin...all/all085.jpg
http://www.autohobbypage.com/cgi-bin...co/ggco718.jpg
http://www.autohobbypage.com/cgi-bin...ar/star138.jpg
http://www.autohobbypage.com/cgi-bin...ap/swap207.jpg
http://www.autohobbypage.com/cgi-bin...kat/kat105.jpg
http://www.autohobbypage.com/cgi-bin...des/des097.jpg
http://www.autohobbypage.com/cgi-bin...ul/tul0501.jpg
http://www.autohobbypage.com/cgi-bin...hal/hal179.jpg
http://www.autohobbypage.com/cgi-bin...on/moon183.jpg
http://www.autohobbypage.com/cgi-bin...ar/star165.jpg

Corts60 10-08-2009 10:07 PM

Re: Roll pans?
 
here is my '60:
http://i234.photobucket.com/albums/e...C/SDC15605.jpg

oklahomaduner 10-08-2009 10:54 PM

Re: Roll pans?
 
Thanks guys! Corts, that truck is nice! Any stepsides with a roll pan?

lakeroadster 10-09-2009 07:16 AM

Re: Roll pans?
 
2 Attachment(s)
My '65 Stepside with a LMC "Taiwan" Roll Pan. If I had it to do over I would have used a Mar-K pan, they are made in the USA.

I included a picture without the roll pan for comparison...

Hope this helps.

lakeroadster 10-09-2009 07:21 AM

Re: Roll pans?
 
2 Attachment(s)
I have contemplated a front roll pan also but haven't been able to find anyone that manufacturers front roll pans for the 60-66 Trucks.

Here is a couple of pictures of a truck with a homemade front roll pan. I have mixed feelings about the look.. on this one, without the front bumper, the grille looks like it's ready to fall off. :lol:

jonzcustomshop 10-09-2009 08:28 AM

Re: Roll pans?
 
5 Attachment(s)
a couple fronts

1Bad62Pro/Street 10-09-2009 01:43 PM

Re: Roll pans?
 
1956-1987 REAR CORVETTE ZR1 ROLL PAN FITS A 1955-1987 CHEVY/GMC STEPSIDE

There are a few fellas on here who have the rear Corvette ZR1 Stepside Roll Pans on here!

http://www.trendesignautosports.com/...ans/RP1225.jpg

http://www.trendesignautosports.com/...Pans_Chevy.htm

dlisabeth 10-26-2009 02:22 PM

Re: Roll pans?
 
Quote:

Originally Posted by 1Bad62Pro/Street (Post 3560006)
1956-1987 REAR CORVETTE ZR1 ROLL PAN FITS A 1955-1987 CHEVY/GMC STEPSIDE

There are a few fellas on here who have the rear Corvette ZR1 Stepside Roll Pans on here!

http://www.trendesignautosports.com/...ans/RP1225.jpg

http://www.trendesignautosports.com/...Pans_Chevy.htm

Does anyone have a picture of this roll pan installed. I have one and am not sure how I am going to mount it yet. I don't think I want to bond it directly to the bed with fiberglass. I am considering doing some fiberglass work to the pan to create a 90 degree lip across the top of the pan so that it can be bolted to the cross sill from underneath as well as use the lips already along the side to bolt it to the bed sides from underneath. I would like to see how others mounted it though.

Thanks,

Derek

4dranch 10-26-2009 02:31 PM

Re: Roll pans?
 
1 Attachment(s)
Here's one I saw this weekend on a 62

my67chevytruck 10-26-2009 02:42 PM

Re: Roll pans?
 
1 Attachment(s)
Quote:

Originally Posted by dlisabeth (Post 3587554)
Does anyone have a picture of this roll pan installed. I have one and am not sure how I am going to mount it yet. I don't think I want to bond it directly to the bed with fiberglass. I am considering doing some fiberglass work to the pan to create a 90 degree lip across the top of the pan so that it can be bolted to the cross sill from underneath as well as use the lips already along the side to bolt it to the bed sides from underneath. I would like to see how others mounted it though.

Thanks,

Derek


heres a pic of mine. it was mounted above the rollpan, you can see the stainless hardware, and the sides were mounted to the fender lip ..

1Bad62Pro/Street 11-08-2009 05:42 PM

Re: Roll pans?
 
Here is your Corvette Stepside Roll Pan:



All times are GMT -4. The time now is 04:15 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com