BONZEYE's 86 C10 LONGBED
 

I bought this truck from a guy down the street from me for $400. It needed a new tranny and everything else was clean about it.

-I got the tranny Rebuilt.
-Did a rear end on leave swap on 4.5" blocks.
-Cut 3" of coil in the front.
-Had to take the front wheel wells out for clearence.
-Shaved the side lights and passenger door handle and lock. (when i get the popper kit i will shave the driver side.


I currently have the bed off and am designing a 2X6 C-notch for it, hopefully this weekend i can start on my notch.. Baggs to come soon also.

Re: BONZEYE's 86 C10 LONGBED
 

"Here is some pics of my primer job

Re: BONZEYE's 86 C10 LONGBED
 

I got the bed off last night. I am designing the rear end notch and bagg setup in 3D. . Pics soon to come

Re: BONZEYE's 86 C10 LONGBED
 

Cool ride! Good luck with the build;)

Re: BONZEYE's 86 C10 LONGBED
 

looks good i love the long beds slammed like that

Re: BONZEYE's 86 C10 LONGBED
 

I got started on my V notch.. Iv never seen anyone do the notch like this, thought it would be cool.. Still need the 4 link welded up .. And bagg mounts

Re: BONZEYE's 86 C10 LONGBED
 

Why such a big notch? You going to lay it out on some 30s? Your fabrication looks good other than that.

Re: BONZEYE's 86 C10 LONGBED
 

Good start to your project. I too wonder about the huge notch. What are your plans so far other than suspension?

Re: BONZEYE's 86 C10 LONGBED
 

Looking sick!!! Awesome work...

Re: BONZEYE's 86 C10 LONGBED
 

Thanks for the comments. . The notch seems BIG cause i used 2x6 tubing. and in the V configuration it sticks up way higher. The plan was to put at least some 24" eventually. And the bumper lays about 6 inches further than the frame. So i figure when the bumper is grinded all the way down ill put some Titanium blocks on the frame and lay frame.

A big concern i have is what i am going to do for the fuel cell.

Re: BONZEYE's 86 C10 LONGBED
 

Here is a quick rendering i made of what i want. THeres no bagg mounts on it yet. Still thinking about that one.

Re: BONZEYE's 86 C10 LONGBED
 

awesome progress! looks real good. you work fast man... it looks like the v in the notch is going to be higher than the bed sides though... may just be the pics

Re: BONZEYE's 86 C10 LONGBED
 

I just put the bed on n the notch looks perfect. Its wayy lower than the bed.

Re: BONZEYE's 86 C10 LONGBED
 

Cool project!

Re: BONZEYE's 86 C10 LONGBED
 

:metal: right on man!!

Re: BONZEYE's 86 C10 LONGBED
 

hey man,those pics dont look like salas to me.
where in salinas do you live?
i was born and raised but then joined the army and yada yada yada.

truck is gonna be sick all slammed out like that.

Re: BONZEYE's 86 C10 LONGBED
 

Cool looking build. You really do work quick! Keep at it.

Re: BONZEYE's 86 C10 LONGBED
 

North County Salinas... . I just put the rear baggs on, and workin on the front.. Here is some pix of it layed out..

Re: BONZEYE's 86 C10 LONGBED
 

Re: BONZEYE's 86 C10 LONGBED
 

Re: BONZEYE's 86 C10 LONGBED
 

Re: BONZEYE's 86 C10 LONGBED
 

http://i53.photobucket.com/albums/g6...1/100_0143.jpg

http://i53.photobucket.com/albums/g6...1/100_0147.jpg

Re: BONZEYE's 86 C10 LONGBED
 

Cool, how hard will it lay out now? I wanna see one with the bed set in place.

Re: BONZEYE's 86 C10 LONGBED
 

Its layin this low


http://i53.photobucket.com/albums/g6...1/100_0169.jpg

Re: BONZEYE's 86 C10 LONGBED
 

Now thats low....:metal: