The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - step side wood box (https://67-72chevytrucks.com/vboard/showthread.php?t=368912)

Larry1

10-26-2009 08:45 AM

step side wood box

I have the box off the truck and was wondering whats the best way to replace the wood.Should I do it with it off the truck or should I do it after I put in back on.Thanks.

Shyguy

10-26-2009 08:58 AM

Re: step side wood box

I am not sure how others do it, but we did a '63 C-10 for my grandson with the bed on and it worked out real good.

I know some vendors have information on how to do it, but GMC Pauls is the one I remember.

Danny

cdowns

10-26-2009 10:04 AM

Re: step side wood box

i would think i'd put the bed on the truck and square it up then install the wood

Mudder

10-26-2009 02:15 PM

Re: step side wood box

I bolted all the metal together. Laid in onto the frame then installed the wood and strips.

69GMCLonghorn

10-26-2009 03:04 PM

Re: step side wood box

I did mine on the frame and wished I'd done it on saw horses. It was going to be a lot of work either way, but I got the feeling that, had I pulled it off, it would have been ever so slightly easier.

Mudder

10-26-2009 05:20 PM

Re: step side wood box

I will say one thing that I found out. It is or would be a lot easier with two people doing it. Just someone to help hold things in place.

All times are GMT -4. The time now is 11:01 AM.