The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Dumb arse clutch spring question (https://67-72chevytrucks.com/vboard/showthread.php?t=369958)

Sicboy

11-02-2009 03:58 AM

Dumb arse clutch spring question

So the rebuilt 327 and saginaw 4 spd are back in the 66. Everything is hooked up, cept the exhaust and the clutch return spring. Where the hell does the spring attach at the rear end of the spring? Does it attach to the cross member? Pics? At the front, it attaches to the clutch pivot crank.

kalirodding

11-02-2009 05:53 AM

Re: Dumb arse clutch spring question

Im not positive but I think there should be a hook or bracket attached to the crossmember that it ataches to.

63 & 64 Bowties

11-02-2009 08:48 AM

Re: Dumb arse clutch spring question

It hooks into a single hole on the top side of the crossmember.

Captainfab

11-03-2009 12:47 AM

Re: Dumb arse clutch spring question

I've typically seen them hooked in a hole in the bottom flange of the frame.

All times are GMT -4. The time now is 11:33 PM.