The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Bought a Motor (https://67-72chevytrucks.com/vboard/showthread.php?t=370291)

ont_guy_38 11-04-2009 11:41 AM

Bought a Motor
 
1 Attachment(s)
I bought the motor out of this car yesterday ,I know it won,t do that in my truck but should be fun to drive.The car has run 1.66 60ft and 12.1 in the quarter.Can hardly wait :)

J_PEPIN87 11-04-2009 12:05 PM

Re: Bought a Motor
 
I'm guessing is a small block?any pics of the engine and wat are the specs?

ont_guy_38 11-04-2009 12:52 PM

Re: Bought a Motor
 
Yes it,s a 350 ported vortec heads , flat top pistons , air gap intake and all i know right now the cam is a comps cam with the 4-7 swap , no pictures sorry

Driveway Dreams 11-04-2009 02:01 PM

Re: Bought a Motor
 
:thumbs: Cool. Should be fun, as long as it isn't at the end of its lifespan on that build.

billnorman 11-05-2009 09:04 AM

Re: Bought a Motor
 
A drag motor can and usually does have extremely high compression, as you can't usually burn a piston in 12 seconds. Racing cams knock the effective pressure down some due to high overlap. My race engine was 11.5 to 1, and I had to use race gas, $6.00 a gallon. It did smell nice, though. Racing valve springs have very high loading characteristics, so if it has a flat tappet cam, you will need to run Shell Rotella oil or additives to keep from wiping the cam. If you are going to drag race exclusively, I guess it's a wise choice, or just cruise on Friday nights, but for street use, you may find yourself regretting this swap.

ont_guy_38 11-05-2009 09:22 AM

Re: Bought a Motor
 
The picture i guess is a little deceiving.The car is very streetable , it is not a drag only car it will run on pump gas just fine . We have been buddies for quite a few years so i know the motor pretty good.The motor is not that wild he just has a good engine tuner and an excellent drivetrain combo

Damien 11-05-2009 12:19 PM

Re: Bought a Motor
 
The chassis of that nova is set up pretty well if he is running 1.66 60' times. By comparison, my stock '02 Trans Am runs a 2.20 60' on p245/50/16 street tires. A vortec headed 350 with flat tops will be in the 10.5:1 range, so pump gas is fine. I would be a little concerned about the intake manifold and cam choice going from the Nova to the heavier truck. I think the engine will lack the low end torque.

N2TRUX 11-05-2009 12:56 PM

Re: Bought a Motor
 
Quote:

Originally Posted by billnorman (Post 3603690)
A drag motor can and usually does have extremely high compression......

"vortec heads , flat top pistons" This should have been your give away...:)


All times are GMT -4. The time now is 06:32 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com