69 wood grain trim
 

Need some trim for my 69 fleet side. Looking for the lower rear bed trim both sides at the back. Also need the lower rear trim for the drivers fender. These are for a driver so they don't have to be perfect.
Thanks for any leads.

You will probably get a faster responce if you post on the parts
board. Write it up as a WTB.

I am sure someone will have the trim you need.

Jim

I would have a few of the pieces you need.

68 Suburban
Which pieces do you have and how much?

Here are the wood trim pieces I have. Your guess is as good as mine as to where each piece goes. These are suppose to be NOS, but I am selling them as very good used since the wrapping is gone and I can't guarantee that they are NOS.

Make me a fair offer on the pieces you need, or if you have anything of interest to trade? I love 67-72 Chevy/GMC literature. :)


This is what WES identified these pieces as a few months ago:

The longer pieces look like the front lower 8' bed pieces (Looks like you have a left and right in woodgrain)
The 4" wood one in paper wrap looks like the right rear lower bed piece (8' bed) and the short woodgrain one looks like the right front lower bed piece for a short bed.

http://www.dingospad.com/forsale/misctrim1.jpg

The bed pieces I need are about 31 inches long and the fender trim piece is about 11 inches.
Don

Sorry the ones I have are about 45", 35" and 22".