![]() |
90 -91 blazer -burb dash cluster
anyone got a pic of a 90 -91 blazer -burb dash cluster need to check one out thanks!!!!
|
Re: 90 -91 blazer -burb dash cluster
which part do you need a pic of. The exterior or the backside?
|
Re: 90 -91 blazer -burb dash cluster
This is the one in my '91:
http://67-72chevytrucks.com/vboard/s...5&postcount=62 It's not stock; it's been converted with a tach and a small lower-right-corner fuel gauge. The cluster works great, unfortunately I buggered the fuel-level sender in the tank while installing a bigger Walbro pump, so the tank has to come back out again. At least from that exercise I learned that I really do have a 40-gallon tank; the build sheet on the glovebox didn't say what it was, and with the original fuel pump even if I crawled into the gas station with it stumbling and coughing I could never get more than 30gal in the tank, turns out it basically wouldn't suck the last 10gal. Most of the '90 clusters and I think all the '91s had electronic speedos. |
Re: 90 -91 blazer -burb dash cluster
nice thats what i wanted to see thx all i need now is a tacho!! i wonder if the 90 91 cluster will fit in my 78 c10
|
Re: 90 -91 blazer -burb dash cluster
No it wont because 90-91 uses an electric speedo
|
Re: 90 -91 blazer -burb dash cluster
That and there's no provision for a dash mounted wiper switch....unless you wanna trim it out for one.
|
Re: 90 -91 blazer -burb dash cluster
Why not just use a '81-'89 gauge housing? Or the proper yr tach dash? They seem to be everywhere.
Quote:
What did you fuel gauge come from? Here is my '89 with tach. ' http://i302.photobucket.com/albums/n...d/IMGP0276.jpg |
All times are GMT -4. The time now is 01:41 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com