The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   steering column (https://67-72chevytrucks.com/vboard/showthread.php?t=373493)

Lo78 11-25-2009 12:31 AM

steering column
 
I have a 78 swb that i am doing a enginge swap from an 89 1500. My question is if the steering column will work in my 78. thanks steve

Lo78 11-25-2009 01:40 AM

Re: steering column
 
if this wont work what column will that has a 4 speed automatic. thanks steve

ghettoluxury 11-25-2009 01:50 AM

Re: steering column
 
Quote:

Originally Posted by Lo78 (Post 3638353)
if this wont work what column will that has a 4 speed automatic. thanks steve

your factory column should work you just need an overdrive inicator for everything to look correct

Lo78 11-25-2009 10:53 PM

Re: steering column
 
my factory column was a 3 speed manual , plus i would like tilt. what column will work for this? thanks steve

ghettoluxury 11-25-2009 11:17 PM

Re: steering column
 
Any auto column and tilt columns are always a little more $.

72 CustomCamper 11-26-2009 12:24 AM

Re: steering column
 
The 89 column is slightly different than the 78 column. 73-83 had the wiper switch on the dash, starting in 84 the wiper switch was moved to the column...


Chuck

Twitchin R&C 11-26-2009 01:23 AM

Re: steering column
 
yup. hes right. my new crew cab that i just got had a tilt column swap and now i have two windshield wiper switches and i dunno which one actually works:lol: but everything else looks like it fit just fine. Lots of wires comin out of the newer column though.

Lo78 11-26-2009 02:07 AM

Re: steering column
 
so the 89 column will bolt up and i can just wire the wipers thru the column and do away with my switch on the dash,? thanks steve

Lo78 11-26-2009 09:24 PM

Re: steering column
 
does any1 else know anything about the columns ? What is my best bet ? Should i just put a shifter on the floor? The 89 column bolts up on the inside of the firewall and the 78 column bolts up on the outside of the firewall. So what do i need to do to get tilt and also an indicator for the new 700r tranny auto? thanks steve

ghettoluxury 11-26-2009 11:10 PM

Re: steering column
 
The 89 will not work due to the body style change. You need 73-87 and a 73-83 is direct replacement as stated above. 84-87 will work you will just have an extra wiper switch unless you decide to wire the one on the column up, 88-91 blazers and crew cabs will also work the same as the 84-87. The column from the 89 half ton will not work.

72 CustomCamper 11-26-2009 11:39 PM

Re: steering column
 
The column from a 88-91 suburban is the same as a 88-91 blazer. The PRNDL21 indicator screws into the dash cluster. You will need one from an overdrive truck from 81-87 pickup or 81-91 blazer or suburban...


Chuck

Lo78 11-26-2009 11:41 PM

Re: steering column
 
thank you ghettoluxury

ghettoluxury 11-27-2009 08:36 PM

Re: steering column
 
no prob


All times are GMT -4. The time now is 11:42 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com