The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Gauge Questions (https://67-72chevytrucks.com/vboard/showthread.php?t=373540)

NelsonMahrt

11-25-2009 02:06 PM

Gauge Questions

I have a 66LB, Fleet side, large window. The old gas gauge reads 1/4 to 3/4 and the needle moves around a lot, so I want to add a new gauge that will tell me when I'm approaching empty! Oh course this leads to pulling the gauge cluster out and dropping in a 5 hole custom panel (just can't seem to do one little project at a time). Does anyone know what Ohms (0-30?) I need to get?

joe231

11-25-2009 02:53 PM

Re: Gauge Questions

you are going to run the stock sender? if so 0-30 is correct. you might want to check your sender for problems before you are convinced the gauge will fix the problem....

NelsonMahrt

11-25-2009 03:21 PM

Re: Gauge Questions

Quote:

Originally Posted by joe231 (Post 3639059)

you are going to run the stock sender? if so 0-30 is correct. you might want to check your sender for problems before you are convinced the gauge will fix the problem....

Din't know I had a choice on using anything aftermarket with a stock tank. sender. Thanks for the info on the Ohms.

joe231

11-25-2009 03:26 PM

Re: Gauge Questions

there are some guys around that will convert your stock sender to a 0-90 ohms.....

Oh and :welcoem:

LILRED66

11-26-2009 12:26 AM

Re: Gauge Questions

Welcome to the forums from Kansas City, KS.

What Joe said on the 0-30 ohms fuel senders.

All times are GMT -4. The time now is 07:58 PM.