Hub cap for '70 C20 3/4 ton
 

I had some new rubber put on last week and it cost me a few dollars plus a hub cap that wasn't there when I parked it back in the garage! I've done the "hound dog" thing re-tracing my drive home but no luck. :no:

Anyone have one of these kicking around they would part with, or maybe a line on where I might get one?

Re: Hub cap for '70 C20 3/4 ton
 

That looks like a nice truck.
No offense, but this would be a good opportunity to get rid of those late model alum caps and put on the correct stainless style caps.
I may have a nice set, if you need them.

Re: Hub cap for '70 C20 3/4 ton
 

No offense taken - I'm not familiar with what the original caps would have looked like. Do you have a photo you could upload - I might consider changing these ones out.

Re: Hub cap for '70 C20 3/4 ton
 

They are stainless.
They look nice with trim rings, too.

Re: Hub cap for '70 C20 3/4 ton
 

Look at my avitar for the correct steel paintable version.
R/

Re: Hub cap for '70 C20 3/4 ton
 

Thanks guys - I'll keep an eye out for this style. I may have a lead now to replace the missing cap, so I'll chase that down first, but ultimately I'd like to have the correct hub caps in place. Appreciate your help!

Re: Hub cap for '70 C20 3/4 ton
 

No Problem Chevy North!!!! If you can't find one like in your picture closer to you, let me know. I might have one of those type also. I would have to check. Good Luck on your treasure hunting.

Re: Hub cap for '70 C20 3/4 ton
 

:clap: Yes! Found two replacement caps on a another board and they are on the way. Thanks again guys.

Re: Hub cap for '70 C20 3/4 ton
 

Outstanding, good on ya, now you have some caps.
R/

Re: Hub cap for '70 C20 3/4 ton
 

Do you still have these caps? Will they fit a C10? I need just one, so let me know.
Thanks

Re: Hub cap for '70 C20 3/4 ton
 

Hey SFCHARR,
The caps in this thread are for a 3/4 ton pickup, both styles that are shown. The first example is that of newer style, mid to late 70's and ealy 80's and the second and third examples are 3/4 ton caps for our 69-72 trucks with a blue bowtie. The color has been rubbed off on one of the examples. What are you exactly needing? This is a really old thread, but PICKMUP is still around and is a vendor.
R/

Re: Hub cap for '70 C20 3/4 ton
 

while everyone is talking c20 hub caps....lol.....Im wanting a set of the ones PICKMUP posted for my '63 c20......

Re: Hub cap for '70 C20 3/4 ton
 

Have you tried PICKMUP yet. I recommend you PM him and aquire about some caps. He is authorized to sell on here.
R/
Billy