Pro comp roller rockers?
 

I need to buy some rocker arms for my 427 build and i'm thinking of going with comp cams magnum roller rockers but came across these while searching the web.they look just like comp cams pro magnum rockers and was wondering what yall think about them and if anybody has used them before.on the description it said that they're a new and better design.
Ebay item number-370301188231

Re: Pro comp roller rockers?
 

Dont skimp on the rockers if one of the 16 losses its needle bearings... You know the rest of the story.

Re: Pro comp roller rockers?
 

I wouldn't want a cheap rocker to let go and cost me an engine. I would save and buy the Comps.

Re: Pro comp roller rockers?
 

Got it!yeah i guess i'll just go with the comps magnum they're really not that expensive anyways.

Re: Pro comp roller rockers?
 

I have a set of pro-comp roller rockers on my sbc and uh.... my advice.... go with comp cams. Pro-comp is just cheap foreign made parts and really not worth the money. After 3 weeks of being on my truck the poly lock SOMEHOW backed off n i heard the motor go to tickin and luckily i did because 3 came off. I dont see how it came off like that but i guess anything can happen.. and YES im sure the lock bolts were tight.

Re: Pro comp roller rockers?
 

I've ran Trick flow, Comp, Crane, Crower... and am partial to Crower, or Crane. If you move quick Summit still has sets of the Crane Gold series roller rockers in stock. You will not find more durable roller rocker in a street strip engine, and there a lot lighter than anything steel.

Re: Pro comp roller rockers?
 

Comp Cams rockers have been good to me so far.

I know if the roller tip pin slides out on some of the cheap rockers, the rocker will come down, pop out the valve locks and drop the valve right into the cylinder.

Re: Pro comp roller rockers?
 

I ran the crane gold before going to jesel shafts.

Re: Pro comp roller rockers?
 

Thanks for all the opinions guys, now I really know not to buy the pro comps.I'm going with comp cams.

Re: Pro comp roller rockers?
 

Send me the part number and I will give you a price.

Re: Pro comp roller rockers?
 

any storys on harland sharps?

Re: Pro comp roller rockers?
 

70 stroker i have ran the harland sharps in about 5 different motors without and problems i believe they are a very good rocker

Re: Pro comp roller rockers?
 

I've only heard good things about Harland Sharp - In fact I'm looking at picking up a set of their shaft mounted rockers.

Re: Pro comp roller rockers?
 

I've used two sets of harland sharps and wont bother buying anything else. I tried a set of Summit (aka Scorpion) rockers and I didn't care for them (noisy and bulky). Harland Sharps are great for the money.

Re: Pro comp roller rockers?
 

i was going to ask about the harland sharps but i kept reading
i have a set of 15 that i got for free and one cost 30 bucks
then i have to buy poly locks but i think it will be worth it

Re: Pro comp roller rockers?
 

you want go wrong with harland sharp rockers. i also had a set of scorpions on a bbc once and 6 out 16 failed at the roller tip. i have 1.8 ratio harland sharps now havent had a problem yet. the only thing is when you get radical size springs and big pushrods they may have to be clearanced alittle. i called harland sharp about this they said they would still guarantee there stuff so alls good here.

Re: Pro comp roller rockers?
 

I was under the impression that the Scorpion rockers were one of the best. Sounds like they're not???? Anyone else have experience with them?