The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   need some measurements please (https://67-72chevytrucks.com/vboard/showthread.php?t=375618)

jlaird 12-08-2009 10:48 PM

need some measurements please
 
Anybody want to get off the couch and measure a couple things for me?:lol:

1. How far does the steering column stick out of the firewall?

2. How deep is the wiring gutter/channel on the firewall? I shaved mine and cant remember how much I took off. (trying to decide on a steering column length)

3. How high is are the brake/clutch pedals from the floor?

Thanks!
Josh

special-K 12-09-2009 09:17 AM

Re: need some measurements please
 
It`s raining.I`m stayin`on the couch.:lol:

Stocker 12-09-2009 05:32 PM

Re: need some measurements please
 
1. 10" to the -- ack, dunno what you call it -- where it necks down to the smaller, flat-sided shaft that extends down to the rag joint. Measured from horizontal center of the column at the firewall (would be longer measured from the top, shorter measured from the bottom). Sure hope that made sense... :o

2. Upper rain gutter is 7/8". Wiring channel below that is 1 1/4" total, and 1 1/16" to edge of rolled lip.

3. 5" to the underside of the brake pedal (no clutch, I have an auto trans). This is with an oem-style rubber floormat, with oem pad underneath.


All times are GMT -4. The time now is 03:40 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com