WTB: 16.5 x10" steel wheels
 

I am looking for a set of 16.5 x 10" wheels that will fit a 3/4 ton 4x4 80 chevy truck. I am looking for steel factory type wheels not spoke.
Thanks, Mark

Re: WTB: 16.5 x10" steel wheels
 

NOBODY has any of these??????

Re: WTB: 16.5 x10" steel wheels
 

I have some, but am hanging onto them. They are getting harder to find in my area. I think a lot of them wound up crushed in my area, as I have had my set for about 11 years and don't stumble across them like I used to. Trevor

Re: WTB: 16.5 x10" steel wheels
 

I have 5 for my truck, my step brother has 2 of them, and I just saw 2 on a ford pickup yesterday. They are really hard to find, if you find some don't let them go. Sorry none for sale.

Re: WTB: 16.5 x10" steel wheels
 

Not sure if this will help but here is a thread about some from along time ago.
http://67-72chevytrucks.com/vboard/s...d.php?t=310694

Re: WTB: 16.5 x10" steel wheels
 

The size is 16.5x9.75
Here is a thread with a link
http://67-72chevytrucks.com/vboard/s...highlight=16.5

Re: WTB: 16.5 x10" steel wheels
 

there in recent months have been a few sets posted for sale..
you might wanna search the forums a bit for them

they r there and around because i ve personally had to back out on a set or two because my wife was going to kill me for buying them..

Re: WTB: 16.5 x10" steel wheels
 

Thanks, They are exactly what I am looking for except I need external hubcap nubs.

Re: WTB: 16.5 x10" steel wheels
 

Oh yeah, I didn't notice that. Heres my spare:

Re: WTB: 16.5 x10" steel wheels
 

I have a set of wagon wheels in 16.5, 2 have been blasted, 2 are somewhat chrome. If you cant find any others let me know.

Darren

Re: WTB: 16.5 x10" steel wheels
 

Thanks I have wagon wheels on it now that I am wanting to replace.

Re: WTB: 16.5 x10" steel wheels
 

Just a bit of info for you . There were three different offsets made in that wheel . Not all will work on the front of a 3/4 ton 4x4 . They will rub if you get the ones with the most backspace . I think the other two will work . If you cant insert your finger between the wheel center and the rib in the outer hoop , they wont bolt onto the front .
Frank

Re: WTB: 16.5 x10" steel wheels
 

Thanks for the info!

Re: WTB: 16.5 x10" steel wheels
 

Hey, look what I found. Their probably a lot more than what you want to spend but hey their brand new. Check out the "Heavy Duty Truck - 20 Series"
http://www.stocktonwheel.com/4wd_offroad.htm

Re: WTB: 16.5 x10" steel wheels
 

Jeez, $200 for a stock friggin wheel. I'll hit the junkyards to find them. That's just crazy.

Re: WTB: 16.5 x10" steel wheels
 

Yeah its just a last resort. I'd start calling up junk yards, theirs bound to be some somewhere.

Re: WTB: 16.5 x10" steel wheels
 

I had a set of 8s on my old truck, I sold them and can't remember to who. I woudn't mind having a set. Everytime I hit the yard here, that is one of the many things I look for.

Re: WTB: 16.5 x10" steel wheels
 

will these work http://67-72chevytrucks.com/vboard/s...d.php?t=383798

Re: WTB: 16.5 x10" steel wheels
 

They don't look like GMs, but I only ever had 1 set, that was couple years ago.

Re: WTB: 16.5 x10" steel wheels
 

I`ve run the wider offset on all four corners.The only problem is mixing them up.The 9.75s were primarily a rear wheel for 2wds,which are deep offset, and the less offset are aftermarket for 4wds and utility.
The inner nubs are Ford wheels.The clip-type are`68-earlier,and the outer nubs in that listing are correct for`69-up GM.
Just because these wheels aren`t blingy hoops doesn`t make them cheap.For a nice set figure sandblasting,powdercoating,and a set of cherry hubcaps=not cheap,just more classy.When those blingy hoops are dull,damaged,or just played out these steelies are just breaking in.You can blast and paint them forever.

Re: WTB: 16.5 x10" steel wheels
 

Im going to have to disagree with you about the ford ones being inner nubs, maybe some of them were but I have 2 or 3 of the outer nub ones with ford stamped on them and my others are gm.

Re: WTB: 16.5 x10" steel wheels
 

Disagree if you want.Just like GM went from clips to outer nubs,Ford went from inner to outer nubs.My point was GM never used inner nubs.

Re: WTB: 16.5 x10" steel wheels
 

OK I took what your were saying as "ford only had the inner nubs", that's all.

Re: WTB: 16.5 x10" steel wheels
 

Wow that is expensive. I wonder what the 16 x 10" would look like. They are 155.00.

Re: WTB: 16.5 x10" steel wheels
 

Did you ever find any of these? There's some on craigslist: http://houston.craigslist.org/pts/2555976255.html

Or if you look up "camper special" some of the trucks still have them on the rear, this one looks like the might be: http://dallas.craigslist.org/ndf/cto/2582951779.html