The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   Canada WTB - Manual pedal setup and linkages (https://67-72chevytrucks.com/vboard/showthread.php?t=378676)

tjsblazer 12-31-2009 01:03 AM

WTB - Manual pedal setup and linkages
 
I am looking for a complete manual pedal setup including brake and clutch pedal, all linkages, rods, springs and Zbar. Application is for a 72 K5 Blazer. Minor surface rust is not an issue but really looking for something in good shape.

wancosc356 12-31-2009 01:13 AM

Re: WTB - Manual pedal setup and linkages
 
Gas pedal or brake pedal setup?

tjsblazer 12-31-2009 01:18 AM

Re: WTB - Manual pedal setup and linkages
 
Brake and Clutch pedal setup. I am doing an Auto to Manual transmission swap. I assume the accelerator is the same in both setups.
Thanks, Jeff.
Quote:

Originally Posted by wancosc356 (Post 3701514)
Gas pedal or brake pedal setup?


wancosc356 12-31-2009 01:20 AM

Re: WTB - Manual pedal setup and linkages
 
Oh ok. I believe the accelerator pedals are the same. I don't have a brake/clutch pedal setup though. Im sure there are quite a few out there. Good luck.

Jim_PA 12-31-2009 09:19 AM

Re: WTB - Manual pedal setup and linkages
 
The bracketry on the firewall shouldn't need to be changed, just so you know -

Accelerator is separate from the whole brake/clutch pedal system, so no worries there.

Duncan and son 12-31-2009 10:41 AM

Re: WTB - Manual pedal setup and linkages
 
Would a 72 cheyenne super with manual trans 2 wheel drive set up come close to working (except for trans linkage)? If so we have a complete set up that is very nice that is in a low milage truck that was wrecked.
Hope that helps Paul

tjsblazer 12-31-2009 08:36 PM

Re: WTB - Manual pedal setup and linkages
 
Quote:

Originally Posted by Duncan and son (Post 3701924)
Would a 72 cheyenne super with manual trans 2 wheel drive set up come close to working (except for trans linkage)? If so we have a complete set up that is very nice that is in a low milage truck that was wrecked.
Hope that helps Paul

I am going to look in to it as I'm not sure. I think some parts will but the clutch rods will be different. I'll get back to you when I know for sure. Any one elso know for sure.
How much would you want for the parts? or PM me. Thanks.

49m 01-01-2010 02:41 AM

Re: WTB - Manual pedal setup and linkages
 
I have a set up i will sell you for $30 plus shiping

tjsblazer 01-01-2010 11:09 AM

Re: WTB - Manual pedal setup and linkages
 
Quote:

Originally Posted by 49m (Post 3703472)
I have a set up i will sell you for $30 plus shiping

What vehicle did it come out of? Is it complete, both inside cab and under hood? Would you have any pics?
Thanks, jeff.

classicchev 01-01-2010 01:20 PM

Re: WTB - Manual pedal setup and linkages
 
where are you in the great white north? I have a couple setups out of 68 trucks in storage.

plcamp 01-01-2010 01:38 PM

Re: WTB - Manual pedal setup and linkages
 
I have a setup still in my 72 jimmy 4x4 465 Im converting to an automatic setup soon so if they would be interchangeable Ill even trade if you will pay shipping to 32409

tjsblazer 01-01-2010 01:47 PM

Re: WTB - Manual pedal setup and linkages
 
Quote:

Originally Posted by classicchev (Post 3703911)
where are you in the great white north? I have a couple setups out of 68 trucks in storage.

Waterloo, Ontario. Do you have the complete setup, (pedal to clutch fork for 4wd)?

tjsblazer 01-01-2010 01:49 PM

Re: WTB - Manual pedal setup and linkages
 
Quote:

Originally Posted by plcamp (Post 3703945)
I have a setup still in my 72 jimmy 4x4 465 Im converting to an automatic setup soon so if they would be interchangeable Ill even trade if you will pay shipping to 32409

I am doing an auto to manual swap in a couple of months on my '72 K5 Blazer. Maybe we should talk. I'll send you a PM.

wancosc356 01-01-2010 02:46 PM

Re: WTB - Manual pedal setup and linkages
 
Duh! I do have a setup. Here is the link to it. It is the brake/clutch pedal assembly. And a used master cylinder. Make me an offer on it if you are interested.
http://67-72chevytrucks.com/vboard/s...=1#post3704029

49m 01-02-2010 12:02 AM

Re: WTB - Manual pedal setup and linkages
 
its out of a 72 k10. I have just the pedals and brackets for inside cab

tjsblazer 01-02-2010 01:25 AM

Re: WTB - Manual pedal setup and linkages
 
Quote:

Originally Posted by 49m (Post 3704971)
its out of a 72 k10. I have just the pedals and brackets for inside cab

Thanks, I think for now I am going to hold out to try and find a complete, correct set up.

classicchev 01-02-2010 10:51 AM

Re: WTB - Manual pedal setup and linkages
 
no, its 2wd. PM Teeitup, he is closer.

1971gmcshortbed 01-02-2010 10:53 AM

Re: WTB - Manual pedal setup and linkages
 
Are the brake pedals different from auto to manual?


All times are GMT -4. The time now is 08:48 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com