NP 205 seals
 

Where can i buy the seals for in the adapter for a np205 to turbo 350. I want to replace the three seals before i put the tranny and transfercase in my truck but do not know where to get them. sites or part numbers are apreciated. Thanks again guys

Re: NP 205 seals
 

NAPA (least that's where I got mine)

Lip seals I don't have a # for, but take in one of the old ones, they should be able to match it.
O-ring type (actually square cut) 1-3926 (NAPA), I had a spare and it's still sitting on my desk, lol.

Re: NP 205 seals
 

I looked up the napa part number 1-3926 and it came up a big o-ring thats 4.612 I.D. thats the big o-ring for the back of the transmission i need the small one for inside the adapter that goes on the shaft. Thanks

Re: NP 205 seals
 

I personally have never incountered a seal there, just the big o ring and rtv between the t-case housing and adapter with the trans fluid lubing the adapter but that's just my experance

Re: NP 205 seals
 

There's a seal in the adapter, I changed mine out last summer because the transmission was dumping gear oil into the transfer case.

However, mine being a 1977 with the sm465 it might not be the same part number.

Try looking up under a 1980 Chevrolet half ton. 1980s all came with NP205 transfer cases.

There are 2 seals for the 205. The earlier one for the smaller input shaft, and the later one for the larger input shaft.

Re: NP 205 seals
 

I got mine through o'reilys a couple years ago when I did mine I had the sm465 4 speed in front though.

Re: NP 205 seals
 

There is definately a seal on the input shaft. Here is a picture of that seal. I can't remember where I got mine but this picture may help you get yours.

http://i49.photobucket.com/albums/f2...2000/NP205.jpg

Re: NP 205 seals
 

Yes the seal in the picture is the one im refering to i just dont know where to get it. Ive tried just looking it up and i cant find it. Thanks for the replys