The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Cab Bolt Torque Specs (https://67-72chevytrucks.com/vboard/showthread.php?t=380152)

198plus

01-09-2010 01:53 AM

Cab Bolt Torque Specs

Anyone know the proper torque for the front and rear cab bolts using rubber bushings ?????

Thanks

198plus

01-09-2010 11:57 AM

Re: Cab Bolt Torque Specs

Bump.......Anyone ?????????

62gmc910

01-09-2010 01:03 PM

Re: Cab Bolt Torque Specs

not spec to cab bolts but 1/2 -13 grade 5 (3slashs) 55 - 75 ft lbs. I would try 60 with lock tite for long term install or antiseize for short term
you should feel metal to metal contact as the spacers load up to each other

lakeroadster

01-10-2010 09:24 AM

Re: Cab Bolt Torque Specs

2 Attachment(s)

I just installed a set of cab mounts on my 65 C10 a couple months ago. They came with cad plated bolts and nylon lock nuts. No torque spec's were listed, which is typical if nylon locknuts are used.

All times are GMT -4. The time now is 11:10 AM.