? on using 72 swb boxside on 72 blazer
 

I bought a pair of 72 swb boxsides for my 72 blazer from triplus,supposebly goodmark i was told but any ways what is required to use the inner as well as the outer.I was looking at them and i dont know which spot welds to remove at the rear are to remove the inner and am scared i will loose the tail gate mounts in that area if i remove the inner wrong on the new sides.My inners on my blazer are okay does the tailgate mount stay with the inner thats on the blazer now when i remove those qtrs.Sure would be nice to use the new inners but i still would want to seperate and put on some zero rust or undercoating or somthing on the new qtrs backside .thanks for any help.Jeff in rusty Nebraska

Re: ? on using 72 swb boxside on 72 blazer
 

Welcome to the board.

There's a few threads floating around on this subject within the blazer section.

More than likely not the way your looking at accomplishing the task at hand but here's a thread on how I did it.

http://67-72chevytrucks.com/vboard/s...d.php?t=360248

Re: ? on using 72 swb boxside on 72 blazer
 

I used both new inner and outer bedsides on mine. Install was pretty easy. Click on my link to kind of get an idea where I made my cuts.