The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   General Discussion (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=15)
-   -   door locks (https://67-72chevytrucks.com/vboard/showthread.php?t=381795)

tecky11 01-18-2010 02:22 AM

door locks
 
ok, i need some help, i boght a f#$d, and i ned to replace the door lock assy. how on eath do i get them out to replace them. I can get repalcements for 15 bucks whcic is cheaper than paying a locksmith to rekey it. any help would be appreicated

72BlckButy 01-19-2010 09:35 AM

Re: door locks
 
tecky11... I'm actually going to move this to the General Discussion to see if we can get you some more responses.

I believe you will need to do the following:

Remove the inner door panel
Remove any vapor barrier (plastic)
Have the window rolled up -or- remove the window if it's in the way (I believe it shouldn't)
Proceed to remove the door lock assembly from the 'inside' of the door

If you can provide us with some more information on the vehicle, I bet there's an online source for this information.

Best of luck!

LockDoc 01-19-2010 10:47 AM

Re: door locks
 
Quote:

Originally Posted by tecky11 (Post 3740284)
ok, i need some help, i boght a f#$d, and i ned to replace the door lock assy. how on eath do i get them out to replace them. I can get repalcements for 15 bucks whcic is cheaper than paying a locksmith to rekey it. any help would be appreicated


Depending on the year, some of the Ford retainer clips are under the weather strip on the edge of the door.

LockDoc

old Rusty C10 01-19-2010 12:10 PM

Re: door locks
 
the same way you do a chevy but on a ford.... try www.fordtruckenthusiasts.com or www.fordtruckfanatics.com either site is great... Fords arent so bad trust me i have owned three of them and besides if they were so bad why are they the only American auto maker that hasnt gone bankrupt???

68C15 01-19-2010 11:11 PM

Re: door locks
 
year make and model please.

NO, I don't work for AutoZone!!!

tecky11 01-19-2010 11:19 PM

Re: door locks
 
79 f250

old Rusty C10 01-19-2010 11:25 PM

Re: door locks
 
they should have a system similar to the chevy with the pop out clip

Sillyoldman 01-19-2010 11:27 PM

Re: door locks
 
My 94 exploder had the same retention clip as a chevy.

tecky11 01-20-2010 11:48 PM

Re: door locks
 
thanks guys i got it! there was a retaiing clip on the inside of the dooir that i didnt see


All times are GMT -4. The time now is 06:52 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com