The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   CA 71 GMC parting out (https://67-72chevytrucks.com/vboard/showthread.php?t=382788)

jerry moss 01-24-2010 01:08 AM

71 GMC parting out
 
local sales only since i have no pics- my computer crashed and i lost everything and have to try relearning how to do pics. but if you are local and want to look at it you're welcome to come look at it. here's the info:71 GMC 2500 2wd, no motor, trans is in the bed, right inner and outer fender is junk.
#1-left front fender-$60.00 SOLD
#2-doors-$50.00 each extra mirror holes and 6" speaker holes,not rotted-SOLD
#3-small block p-s pump and brackets with pully-$40.00 SOLD
#4-small block engine stands-$20.00
#5-auto crossmember-$30.00
#6-chrome grille-$80.00 complete,one small dent in center bar-SOLD
#7-cab-$50.00 needs rockers and???-SOLD
the truck is pretty much complete so if you need little stuff it might be there still. i just hauled it home today and haven't gone over it real close yet since our weather is crappy out her in sunny california-it's rained every day since monday,yuk.
I was just underneath the cab between showers and the under side looks very solid, cab supports and floor look to be in very good shape so it appears a set of rockers and it would be a nice cab.

dazza 01-24-2010 02:35 AM

Re: 71 GMC parting out
 
Jerry,
Do you know if it has either of these?
Thanks

Sublvr72 01-24-2010 03:57 AM

Re: 71 GMC parting out
 
I'm interested in the PS pump and the auto crossmember.

66coffin 01-24-2010 06:36 AM

Re: 71 GMC parting out
 
do you have the rear end for sale?

budnikguy 01-24-2010 10:44 AM

Re: 71 GMC parting out
 
if Jerry Moss cannot help you. I have a rear end out of a 69 GMC 2500 2wd that I will be disassembling starting on Monday if you are interested...PM me.

Quote:

Originally Posted by 66coffin (Post 3753170)
do you have the rear end for sale?


jerry moss 01-24-2010 11:30 AM

Re: 71 GMC parting out
 
Quote:

Originally Posted by 66coffin (Post 3753170)
do you have the rear end for sale?

it has the leaf spring dana 60 under it $50.00, i haven't been under it to check for a ratio tag but since nothing is listed on the SPID i would assume it has 4:10s

jerry moss 01-24-2010 11:31 AM

Re: 71 GMC parting out
 
Quote:

Originally Posted by Sublvr72 (Post 3753133)
I'm interested in the PS pump and the auto crossmember.

i'm in the "other" brentwood-up in nor cal.

jerry moss 01-24-2010 11:32 AM

Re: 71 GMC parting out
 
Quote:

Originally Posted by dazza (Post 3753079)
Jerry,
Do you know if it has either of these?
Thanks

"these" ?????

dazza 01-24-2010 12:30 PM

Re: 71 GMC parting out
 
Sorry. forgot the link...

http://67-72chevytrucks.com/vboard/s...d.php?t=382043

jerry moss 01-24-2010 05:03 PM

Re: 71 GMC parting out
 
Quote:

Originally Posted by dazza (Post 3753523)

P.M. sent

sleepertruck72 01-24-2010 09:07 PM

Re: 71 GMC parting out
 
Interested in the cab. Any pics available ? Also, is the tranny for sale, if so how much ? Thanks.

jerry moss 01-25-2010 12:42 AM

Re: 71 GMC parting out
 
Quote:

Originally Posted by sleepertruck72 (Post 3754604)
Interested in the cab. Any pics available ? Also, is the tranny for sale, if so how much ? Thanks.

sorry i have no pics available, my computer crashed and everything had to be wiped clean and start over with a blank slate. i have to find the disc for my camera and see if i can remember how to do pics. the trans i have no idea on condition so you can have it free.

sleepertruck72 01-25-2010 01:13 AM

Re: 71 GMC parting out
 
Jerry,
No problem about the pics, most of the time my camera has a dead battery, or my wife hides it from me to keep me busy looking for it :devil: I will make the trip over there PM sent

1971gmcshortbed 01-25-2010 01:36 AM

Re: 71 GMC parting out
 
Do you have the GMC outer grille trim pieces? The ones that go on the fender, I need left and right.

special-K 01-25-2010 04:44 PM

Re: 71 GMC parting out
 
How about a 4-eyed headlamp harness to 21771,if you have one?

jerry moss 01-25-2010 09:35 PM

Re: 71 GMC parting out
 
Quote:

Originally Posted by 1971gmcshortbed (Post 3755393)
Do you have the GMC outer grille trim pieces? The ones that go on the fender, I need left and right.

they are there but i'd like to sell them with the grille. if no interest in the whole set up i'll let you know.

jerry moss 01-25-2010 09:38 PM

Re: 71 GMC parting out
 
Quote:

Originally Posted by special-K (Post 3756437)
How about a 4-eyed headlamp harness to 21771,if you have one?

Tim,
the harness is there, i'll have to check on condition. hopefully our crappy weather will clear out before the weekend so i can get out there and work on stripping it out. i pulled the fenders, grille and some interior pieces between showers yesterday but didn't pull the underhood harness.

special-K 01-25-2010 09:42 PM

Re: 71 GMC parting out
 
No hurry.

Chevy57-69 01-29-2010 01:40 AM

Re: 71 GMC parting out
 
Jerry
Do you have the rear leaf spring hangers-if so what do you want for them including shipping to 49707 Thanks Ron

D.PASSMORE 01-29-2010 08:31 AM

Re: 71 GMC parting out
 
Jerry, does the left fender have upper and lower trim holes. Will you ship? Intrested. Thanks David

jerry moss 01-29-2010 11:01 AM

Re: 71 GMC parting out
 
Quote:

Originally Posted by Chevy57-69 (Post 3765497)
Jerry
Do you have the rear leaf spring hangers-if so what do you want for them including shipping to 49707 Thanks Ron

Ron,
the entire frame is still in one piece, i have to keep it a rolling frame to dispose of the hulk. i will speak with the person that will be hauling it away and see if it's possible to get them back- i live in town and have limited space to tear a truck apart.

jerry moss 01-29-2010 11:05 AM

Re: 71 GMC parting out
 
Quote:

Originally Posted by D.PASSMORE (Post 3765701)
Jerry, does the left fender have upper and lower trim holes. Will you ship? Intrested. Thanks David

Dave,
it has no trim holes now but according to the SPID it originally had lower trim only. i will check to see if it's a replacement or just had the holes welded up.

duceducenine 01-29-2010 12:22 PM

Re: 71 GMC parting out
 
im interested in the cab..and doors
maybe grill- put me in line!

jerry moss 01-30-2010 12:58 AM

Re: 71 GMC parting out
 
Quote:

Originally Posted by duceducenine (Post 3766070)
im interested in the cab..and doors
maybe grill- put me in line!

P.M. sent

jerry moss 01-31-2010 11:42 AM

Re: 71 GMC parting out
 
Quote:

Originally Posted by D.PASSMORE (Post 3765701)
Jerry, does the left fender have upper and lower trim holes. Will you ship? Intrested. Thanks David

Dave, the fender has no holes except the emblem so either it's a replacement or the glovebox door has been changed-i never compared the VIN on the glovebox to the cab.


All times are GMT -4. The time now is 04:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com