SW fleet box
 

I realize they are as almost as rare as a Unicorn, but I am looking for a SW fleet box, wood or metal.
Just got back into projects after 20yrs. Had a 64 Chevy SW as my first vehicle... I missed "Big Red" so I decided to get back in the game with a 70 Chevy SW. I got such a good deal on the Step that I could'nt pass it up, hoping to find a SWB. Wow Was I in for a rude awakening. Anyway, if anybody has some leads I would appriciate it

Thanks guy's,

1badhabit

Re: SW fleet box
 

X2 but it will be harder for me i am in wisconsin. i like steppers though.

Re: SW fleet box
 

Huge swap meet (Pate's) nearer the end of April at Texas Motor Speedway. If it's not there, you don't need it... kind of event. Not super convenient but probably worth the drive if you can wait that long.

Re: SW fleet box
 

There are actually a couple of guys in the Springdale/Siloam Springs area that do a lot of older cars and stuff. I can't remember their name, but they usually have some cars and trucks for sale on e-bay. You may try and see if they know where any are at. There are a few board members on here from your area too that may be able to help you out.

Also Welcome to the boards.

Re: SW fleet box
 

What part of Wis? I used to live in Mishicot... 30min south of Green Bay.

Re: SW fleet box
 

Welcome to the forum 1badhabit. There are several forum vendors that have the new parts available for you to build a new bed.

Please note that you must be a supporting member to post classified item. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

Re: SW fleet box
 

Cool. I would like to talk to them, or meet up with them sometime. There is a guy who has a salvage yard with 50 or more 67-72 C-10's, but wont sell any beds or important parts off of them. Frustrating! He has a 67 or 68 bed collecting rust out in the field with no wood in it, just going to waste, again no sale! What can you do? If you come up with some members names let me know.

Thanks,

Re: SW fleet box
 

Sorry, my bad. Got no excuse. I'll pay more attention next time.

1badhabit

Re: SW fleet box
 

I'll check in to Texas in April. When is the date?

Re: SW fleet box
 

call Mike Nevill in springdale he has tons of stuff1 800 825 2777, tell him mike losh sent you

Re: SW fleet box
 

You know Mike? I've talked with him several times on email and bought a bumper off him several years ago. Is he on the board?

Re: SW fleet box
 

Thanks Mike! I'll give him a call. He doesn't own a a salvage yard east of Springdale on Hwy 412 does he?

Re: SW fleet box
 

i dont think he is on here but i have bought a bunch of stuff from him and i know he has several swb

Re: SW fleet box
 

also interested in a short bed have a almost perfect long bed i was going to cut. but springdale isn't that far away

Re: SW fleet box
 

I found out that his shop is less than 1 mile away from my house. Going to meet him tomorrow. Thanks again for the heads up on Nevill"s. You may have saved me alot of time and headaches.

Re: SW fleet box
 

Have you talked to anyone who has cut a LWB into a SW? It's got to be one hell of a project just to keep it strait. I thought about it due to the fact there are a boat load of LWB out there. Don't have the experience under my belt for that type of job.

Re: SW fleet box
 

I've read a thread on this forum whereby a member cut a LB frame down to a SB. Not an uncommon procedure but he also cut the bed and nicely welded the pieces. He posted many pics of the process. Might try a search if you cannot find a reasonable bed.

Re: SW fleet box
 

Thanks, I'll keep it in mind. A Miller 180/220 may be in there for future purchases.

Re: SW fleet box
 

Nevill's is all out of short beds parts for now. I'll be back over there for parts here and there, I'll keep an eye out for you. Seems like a good guy. He does everything for late models.

Re: SW fleet box
 

I had a local welder cut mine down...He charged me 100 bucks...Used the metal support from ECE to support the frame...worked out well...

Re: SW fleet box
 

Here is kevin's low buck build LWB to SWB

Click Me

Re: SW fleet box
 

I just bought one from (Duncan and Son) and its in incredible shape. Its got a steel floor and even it looks unused. I would get ahold of him and see if he might have a leed on one. Good Luck and I hope you have a "little" cash set aside.

JRBECK64

Re: SW fleet box
 

Got any pics? Welded it back together for you to?

Re: SW fleet box
 

Never heard of Duncan and Son. Is there a websight? Ide like to take a look!

Re: SW fleet box
 

Yeah..He cut it and welded it back...I dont have pics but I need to get some...I believe Duncan and Sons is in Texas and they are good people...