![]() |
Any interest in FabFours custom winch bumpers??
I wanted to see if anyone besides myself is interested in acquiring one of these beautiful custom fab'd bumpers that hide the winch very effectively..? If so, we need to collect some data first starting with the frame rail blueprints if possible of the 67-72 Chevy and GMC trucks, Jimmy’s, Blazers, 4x4's... If anyone has them could you please upload a set that shows the complete measurements and also include the fender to fender numbers as well..?
Matt at Fabfours will then see if they can find a way to modify the brackets or see what has to be done to accommodate it for a proper fit.. If you have viewed their pics on their site you will be impressed with the details and workmanship of them... Sincerely, - A.J. :gmc2: |
Re: Any interest in FabFours custom winch bumpers??
I'll take some pictures of my set up. It's a std bumper with a hole cut into it for the rollers. It was retro'd with an old rear flip license plate (for the old gas tanks). You can hardly tell that I have an 8,000 lb winch behind the bumper . It's a Ramsey DCB-246. A lot less expensive alternative.
|
Re: Any interest in FabFours custom winch bumpers??
I would love one but they typically cost more than what I paid for my whole rig! They are great looking though!
|
Re: Any interest in FabFours custom winch bumpers??
Quote:
|
Re: Any interest in FabFours custom winch bumpers??
Quote:
- A.J. |
Re: Any interest in FabFours custom winch bumpers??
Quote:
you PM'd me and did not read the response i guess |
Re: Any interest in FabFours custom winch bumpers??
Quote:
- - I then got your response saying you would think about it but what not sure if you meant you were going to do something directly or simply call them as I did.. Either way, I was not intent on wasting your time... Simply trying to find a means to an end.. I really like the bumpers and the design but they are costly I will admit... But LMC wants $600 for a new chrome one anyway so I figured I would give this a shot and see.. who knows maybe they need some business as well and can figure out a group buy or something where we can get the cost down... Just throwing ideas out there, that is all... If it were me and business was slow, then I would be looking at other ways to move inventory and if creating a new modification meant opening up a new area and group of customers to sell in - why not..? Another area that might interest people is locating a vendor who can put together the complete package for the Autometer gauges.. I have seen several designs floating around, Ryan Hubbard’s, No Limit Eng., etc and they are all unique but the Doggone Gauges and their prices make me sick because for me they are unobtainable right now.. With the billet plate you are looking at $200+ the 7 gauges I need come out to over $800.00 via fleabay - That's a grand right there.. Ridiculous and I will not pay that much.. Perhaps if someone had contacts with Autometer and could get a mass discount and then put them together and sell as a complete unit - I am positive there would be interested parties as long as it was kept at a reasonable cost range.. |
Re: Any interest in FabFours custom winch bumpers??
2 Attachment(s)
Here are the pics
|
Re: Any interest in FabFours custom winch bumpers??
Quote:
That is really innovative...!! What were the specs on that winch and do you think other winches would fit in there as well or any you recommend.. The license plate thing is a requirement out here so that is an option... Thanks for taking your time to upload the pics.. Neato.. |
Re: Any interest in FabFours custom winch bumpers??
amc- I must say I like the way you think. I am in the same boat about some custom gauges, I want a set but the price is so steep... I'm thinking of getting the dakota digital because they're actually cheaper.
|
Re: Any interest in FabFours custom winch bumpers??
fuel for the fire...
DIY4X.com has made them for a while now :P |
Re: Any interest in FabFours custom winch bumpers??
1 Attachment(s)
Quote:
Believe it or not I had another grand idea in my sleep last night ( you know it drives you crazy when you start dreaming about this stuff LOL)... Anyways, I thought that since I am doing a conversion from a 2004 Silverado why can't we use the same gauges..? Obviously they are a completely different design but just look at these - they are beautiful and you can get one from a junkyard.. The only problem is how to make a template that will fit either over the original bezel or replace it that would be cut in the half circle shape... Personally I like them and you get a Trans temp gauge on the far left which all of us really want to have in order to monitor during pulling loads.. If anyone has the ability to design a simple billet or metal template and keep it cheap, then I would really love to hear from you... |
Re: Any interest in FabFours custom winch bumpers??
It's a ramsey winch. If you google that and then go to their DC-200 cut sheet, it will give you the measurements. It's a big winch so, I would imagine that a lot of winches willl fit!
|
Re: Any interest in FabFours custom winch bumpers??
Quote:
- A.J. |
Re: Any interest in FabFours custom winch bumpers??
I've seen those gauges before. I've thought about doing some gauges out of a newer vehicle but I have no clue how I would do it if it's even possible.
|
Re: Any interest in FabFours custom winch bumpers or Gauges??
Quote:
I am glad I am not the only one..LOL.. * Are you running a newer engine such as I = thus the requirement for comp controlled gauges...? I am going to devote some time to this and see what I can come up with.. Do you have any fabricating friends..? Maybe we can figure out a game plan and see what happens.. I have ideas but unfortunately no tools as I got laid off in Sept so I am trying to spend my time effectively getting my truck together NOW.... |
Re: Any interest in FabFours custom winch bumpers??
3 Attachment(s)
It is bolted to the frame using HD "L" brackets. See pics
|
Re: Any interest in FabFours custom winch bumpers??
Ok, I see them now.. Yes, that is doable but I want to think some more on it first. I need to get under the truck and see how much room there is for a winch to fit in without having to alter the bumper height... Thanks again for getting those pics..
|
Re: Any interest in FabFours custom winch bumpers??
I forgot there is a HD plate that is welded and bolted to the winch assembly and then the "L brackets attach that to the truck frame.
|
Re: Any interest in FabFours custom winch bumpers??
|
All times are GMT -4. The time now is 05:33 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com