The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   7.5" rear end (https://67-72chevytrucks.com/vboard/showthread.php?t=389358)

Laid_Out_50 02-28-2010 02:57 AM

7.5" rear end
 
I found a 7.5" rear end would you but it under your truck with a 350hp 400ft/lbs engine and a heavy foot

CAL 58 GMC 02-28-2010 03:22 AM

Re: 7.5" rear end
 
I have one under my truck, 360hp, not too heavy of a foot and no probleams. 7.5 was the same that was used in the newer Camaro's My 2002 Camaro had an LS1 with a 7.5 with no problems.

Laid_Out_50 02-28-2010 03:27 AM

Re: 7.5" rear end
 
HMMMMMMM decisions decisions go with the 7.5" or wait for an 8.5"

red96z28 02-28-2010 11:00 AM

Re: 7.5" rear end
 
Depends on what its out of, a g-body 7.5 is 26 spline axle and not very strong...... an f-body is 28 spline and a little more durable...

LEEVON 02-28-2010 04:03 PM

Re: 7.5" rear end
 
At $50-$250 / per you can afford to find out if it will hold up.


All times are GMT -4. The time now is 08:43 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com