Frame specs
 

I was wondering if anyone had any measurements on their frame from any pulling they might have had done. got in touch with a local shop and my 74 frame has no specs so they dont know where to pull to. its just where the front core support bolts up to that is bent on mine. if you have complete or any measurements that i could use it would be appreciated. cross corner preferred

Re: Frame specs
 

I have the left front bent in on mine at the bumper mount. I measured a few at 28.125 to 28.25" outside of frame to outside of fram at the bumper mounts. Sorry I dont have any diagnal points to measure from.

Re: Frame specs
 

thanks its a start. i have another truck with what i believe is a straight frame but i dont really want to pull it all apart just yet. just to do a few measuremetns

Re: Frame specs
 

PM me your email I have frame specs from a body shop that is used with and frame machine.

Re: Frame specs
 

pm sent

Re: Frame specs
 

go to www.chuckschevytruckpages.com/framespecs.html for diagrams of C/K Series frame specs...good luck

Re: Frame specs
 

i noticed that it stated that the specs you sent me were for a blazer or a jimmy i'm wondering if they cross over. i looked at that chucks page and crossed the numbers for what they say they blazer has and they dont match with what it says my numbers are. i'm not sure what to do here. i'm now wondering if the numbers from "chucks" page are any good or even will work for a shop to fix it.

thanks for any and all help

Re: Frame specs
 

interesting.....the diagram I got from that site were for a C/K series pickup.....let me do a little research and will respond soon....

Re: Frame specs
 

GB: i was referring to the specs i was emailed by they other guy. on chucks website i have that one printed out but those are all straight measurements and i know that they do a lot of triangulation to make sure its all square. and some from the bottom up i dont understand like where the numbers are coming from.