The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Powerglide Yoke switch (https://67-72chevytrucks.com/vboard/showthread.php?t=392099)

l79m20 03-14-2010 04:52 PM

Powerglide Yoke switch
 
I recently replaced my powerglide in my 66 with one out of a 65 and then found out the drive shaft would'nt work because the new trannys splines are more narrow the the original trannys were. Does anyone know what the fine splined yoke are called or part numbers, or are they readily available. any help would be great...........................Kirby

l79m20 03-15-2010 07:26 PM

Re: Powerglide Yoke switch
 
Everybody stumped or maybe did not explain well enough. I need a slip yoke Original to a L6 /auto PG that has fine splines that matches the length of the original I have but without the course splines. question has anyone every seen a fine splined yoke for a 66 1/2 ton l6 auto? If this fine splined yoke exists in the same configuration as my course splined yoke where do I get one? I don't want to lenghten or shorten my drive line. can anyone help me out ?

thunder71 03-15-2010 07:59 PM

Re: Powerglide Yoke switch
 
i think one from a turbo 350 will work for you...hit the junk yard:chevy:


All times are GMT -4. The time now is 01:08 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com