![]() |
Front end rebuild
Where are all you guys buying your frontend rebuild kits from? Are you using the stock rubber bushings or the poly bushings?
Thanks |
Re: Front end rebuild
Im going with the PST kit they offer a Polygraphite bushing instead of the polyurathane bushing. this is an advantage cause it reduces the squeaks that are common on the polyurathane bushing. If you have ever run them u will know what i mean. plus the PST kit is pretty inexpensive. good luck
|
Re: Front end rebuild
I'm going with a PST kit also. In addition to the upgraded polygraphite, they also sell a less expensive set with rubber bushings. I'm probably just going with rubber bushings since my suspension is all stock, only driven occassionally and I'm not too concerned about improving handling. I just want it to drive like new. I have heard very good things about PST's polygraphite though. If you're looking for an upgrade that is probably the way to go.
|
Re: Front end rebuild
Not familiar with PST? Where do you get those from? Yes I have used polyurathane and agree with the noise.
|
Re: Front end rebuild
Check out there website. google PST or performance suspension technolgies. I have there kit to but havent installed it yet
|
Re: Front end rebuild
Quote:
http://www.p-s-t.com/c-220-front-end...ygraphite.aspx |
Re: Front end rebuild
Thanks guys! That what I'll go with.
Do they make those bushings for the cab and bed? |
All times are GMT -4. The time now is 03:35 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com