The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   has anyone made the lsx compressor work in a swap? (https://67-72chevytrucks.com/vboard/showthread.php?t=394901)

SatisTraction 03-30-2010 10:45 AM

has anyone made the lsx compressor work in a swap?
 
i am about to start my 6.0 lq9 swap and i have to have air!!! :lol:


i have been reading up but i have not found any info on the ac compressor. i plad to do the "fred mod" on the engine stand if needed.


so how have you made teh ac work?

I really do not want to relocate the compressor if i do not have to.

Pyrotechnic 03-30-2010 10:53 AM

Re: has anyone made the lsx compressor work in a swap?
 
You can do it but you have to notch and reinforce the frame. If you are a welder/fabricator this is perfect for you, but most people seem to relocate it.

SatisTraction 03-30-2010 12:29 PM

Re: has anyone made the lsx compressor work in a swap?
 
i am a welder / fabricator / penny pincher :)

STOCKISH 03-30-2010 02:01 PM

Re: has anyone made the lsx compressor work in a swap?
 
1 Attachment(s)
You do not have to notch or re-inforce anything. The stock compressor fits perfect. You just have to get A/C lines made to clear the frame. I know it's hard to see in this pic but it Works perfect.

STOCKISH 03-30-2010 02:03 PM

Re: has anyone made the lsx compressor work in a swap?
 
1 Attachment(s)
heres a better pic.

78-5.3 03-30-2010 06:27 PM

Re: has anyone made the lsx compressor work in a swap?
 
Quote:

Originally Posted by 1972SuperCheyenne (Post 3891039)
heres a better pic.

what manifolds are you running is the manifold close to the rail ???

Big Port Jimmy 6 03-30-2010 08:55 PM

Re: has anyone made the lsx compressor work in a swap?
 
http://67-72chevytrucks.com/vboard/s...d.php?t=382076

Look here

menace121978 03-30-2010 10:47 PM

Re: has anyone made the lsx compressor work in a swap?
 
yep, i conquer! no notching or reinforcing or fabricating needed

STOCKISH 03-30-2010 10:53 PM

Re: has anyone made the lsx compressor work in a swap?
 
Factory truck manifolds. I will need to notch the frame about 1/16 inch to clear the frame on the pass. side.

SatisTraction 03-31-2010 10:35 AM

Re: has anyone made the lsx compressor work in a swap?
 
thanks. i got the dockblock part numbers!!!

glock35ipsc 03-31-2010 03:51 PM

Re: has anyone made the lsx compressor work in a swap?
 
Check my build thread after this weekend. I will be finishing mine up starting Saturday. Using the Docs Blocks in the above link, the 5.3's original compressor, and everything else will be the original 85's parts (although they will be replaced with new stuff). As stated, no notching or anything like that will be needed with the Docs Blocks extensions.

68shortstep uses these in all of the 67-72 LS swaps he has done. For the most part, that swap is pretty much the same as a 73-87/91 swap.


All times are GMT -4. The time now is 02:43 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com