The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   OR Blazer Frame Sections (https://67-72chevytrucks.com/vboard/showthread.php?t=395079)

drunkbus 03-31-2010 01:18 PM
Blazer Frame Sections
 
I have a 72 4x4 Blazer frame that is going to the scrap yard. Does anyone need any crossmembers or sections of frame before it goes?

JimmyFloyd 04-01-2010 12:29 AM
Re: Blazer Frame Sections
 
mounts? I could use some to make a dolly with. Rear frame rails if not cut?

72gmcshorty 04-01-2010 01:48 AM
Re: Blazer Frame Sections
 
if the front horns are the same as 2wd i could use the first 8" of both sides...

drunkbus 04-01-2010 11:06 PM
Re: Blazer Frame Sections
 
Quote:
Originally Posted by JimmyFloyd (Post 3894204)
mounts? I could use some to make a dolly with. Rear frame rails if not cut?
I do have the mounts cut off, I have them posted in a seperate thread. Rear frame rails are good, How much do you need?

drunkbus 04-01-2010 11:08 PM
Re: Blazer Frame Sections
 
Quote:
Originally Posted by 72gmcshorty (Post 3894302)
if the front horns are the same as 2wd i could use the first 8" of both sides...
I'm not sure if they are the same as 2wd, I would guess they are but you might want to make sure. I would do $30 shipped if you do want them.

MT300RUM 04-02-2010 09:34 PM
Re: Blazer Frame Sections
 
Do you have the rear rails from the crossmember behind the gas tank back? and also that crossmember itself ?
mine is a little tweaked and if it were cheap enough i might just buy yours rather than straightening mine, my zip is 59901

drunkbus 04-02-2010 10:16 PM
Re: Blazer Frame Sections
 
Quote:
Originally Posted by MT300RUM (Post 3897485)
Do you have the rear rails from the crossmember behind the gas tank back? and also that crossmember itself ?
mine is a little tweaked and if it were cheap enough i might just buy yours rather than straightening mine, my zip is 59901
Right now I still have the whole frame. If I don't hear anything from JimmyFloyd on the rear rails they are yours. I would have to knock the rivets out of the crossmember and break it down to ship it.

drunkbus 04-02-2010 10:30 PM
Re: Blazer Frame Sections
 
1 Attachment(s)
Quote:
Originally Posted by MT300RUM (Post 3897485)
Do you have the rear rails from the crossmember behind the gas tank back? and also that crossmember itself ?
mine is a little tweaked and if it were cheap enough i might just buy yours rather than straightening mine, my zip is 59901
Is this what you are looking for? I would do $65 shipped for the part from the red line back.

MT300RUM 04-03-2010 12:01 AM
Re: Blazer Frame Sections
 
Yeah that would be great , Put me in line

drunkbus 04-03-2010 04:01 PM
Re: Blazer Frame Sections
 
Quote:
Originally Posted by MT300RUM (Post 3897873)
Yeah that would be great , Put me in line
I'll give JimmyFloyd until Sunday afternoon to respond. If he passes or doesn't respond I can ship this stuff out to you on Monday.

69-72 04-04-2010 08:34 PM
Re: Blazer Frame Sections
 
In line for the rear crossmember

drunkbus 04-04-2010 10:36 PM
Re: Blazer Frame Sections
 
Quote:
Originally Posted by 69-72 (Post 3900801)
In line for the rear crossmember
MT300RUM is up next for the rear frame rails and crossmember. I'll let you know if he passes.

drunkbus 04-24-2010 12:33 PM
Re: Blazer Frame Sections
 
Rear frame rails and crossmember sold.

gm71jimmy 04-27-2010 06:29 PM
Re: Blazer Frame Sections
 
Quote:
Originally Posted by drunkbus (Post 3896013)
I'm not sure if they are the same as 2wd, I would guess they are but you might want to make sure. I would do $30 shipped if you do want them.
Hi drunkbus... Do you still have the front frame horns? If you do i will take them for the $30 shipped to Overton Nv 89040. Can paypal you the money
Please let me know. classichotrod@msn.com
Thanks

72gmcshorty 04-27-2010 08:37 PM
Re: Blazer Frame Sections
 
i will have to pass on the front horns

drunkbus 04-28-2010 02:17 PM
Re: Blazer Frame Sections
 
Quote:
Originally Posted by gm71jimmy (Post 3944317)
Hi drunkbus... Do you still have the front frame horns? If you do i will take them for the $30 shipped to Overton Nv 89040. Can paypal you the money
Please let me know. classichotrod@msn.com
Thanks
After looking at them closer, one of the front frame horns was cracked so I wasn't careful when I removed the front spring hangers and they are now trashed in that area. If you only need about the front 6-8" and don't mind welding up the crack they would be fine.

gm71jimmy 04-28-2010 03:31 PM
Re: Blazer Frame Sections
 
Quote:
Originally Posted by drunkbus (Post 3946032)
After looking at them closer, one of the front frame horns was cracked so I wasn't careful when I removed the front spring hangers and they are now trashed in that area. If you only need about the front 6-8" and don't mind welding up the crack they would be fine.
That is fine. I just need the first 5" of them. So if you cut them right in the middle of were the hangers go that would be great. Can paypal you the money. Thanks

drunkbus 04-28-2010 04:59 PM
Re: Blazer Frame Sections
 
Quote:
Originally Posted by gm71jimmy (Post 3946132)
That is fine. I just need the first 5" of them. So if you cut them right in the middle of were the hangers go that would be great. Can paypal you the money. Thanks
PM sent with payment info.

sylfred 04-29-2010 12:23 PM
Re: Blazer Frame Sections
 
in need of a good windshield frame, can you help

drunkbus 04-29-2010 12:39 PM
Re: Blazer Frame Sections
 
Quote:
Originally Posted by sylfred (Post 3947912)
in need of a good windshield frame, can you help
I have one but I'm keeping it until I know if I'll need it or not. I haven't had my top off yet.


All times are GMT -4. The time now is 08:05 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com