The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=12)
-   -   Tahoe C-Notch (https://67-72chevytrucks.com/vboard/showthread.php?t=395251)

lvscott 04-01-2010 02:40 PM

Tahoe C-Notch
 
I bought a Tahoe that came with everything to flip the rear axle except for the c-notch. I have tried searching but no luck. Is the c-notch for a Tahoe and the pick up the same? And is there a recommended notch to buy?

Thanks in advance,
Brandon.

lvscott 04-01-2010 02:52 PM

Tahoe C-Notch
 
I bought a Tahoe that came with everything to flip the rear axle except for the c-notch. I have tried searching but no luck. Is the c-notch for a Tahoe and the pick up the same? And is there a recommended notch to buy?

Thanks in advance,
Brandon.

scotts62 04-01-2010 03:20 PM

Re: Tahoe C-Notch
 
The frames on the trucks are straight where you need to install it, i am not sure about the tahoes but i wouldnt figure it would be that much difference. I have installed 2 DJM kits on trucks and they fit really well and never had any problems with them.

ChevLoRay 04-01-2010 09:24 PM

Re: Tahoe C-Notch
 
What year Tahoe? 2 or 4WD?

1badgmc 04-01-2010 11:09 PM

Re: Tahoe C-Notch
 
I can't speak from experience for a 2-door Tahoe, but if yours is a 4-door, the frames are curved over the axle, so a truck notch wouldn't work.

lvscott 04-02-2010 03:32 PM

Re: Tahoe C-Notch
 
Sorry, its a 96 2dr tahoe.

JWall 04-02-2010 03:53 PM

Re: Tahoe C-Notch
 
I believe they are different & I also just looked @ BellTechs website & the part #'s are different for a truck & 2dr Tahoe flip kit.

98lowtahoe 04-28-2010 01:24 PM

Re: Tahoe C-Notch
 
1 Attachment(s)
They do have a c notch for a 2 door tahoe mine has one HOPE THIS PIC HELPS OUT THIS IS MY 98 2 DR

lvscott 04-30-2010 06:52 PM

Re: Tahoe C-Notch
 
Thanks for the pic. I know what I to do now.

98lowtahoe 04-30-2010 06:59 PM

Re: Tahoe C-Notch
 
Quote:

Originally Posted by lvscott (Post 3950441)
Thanks for the pic. I know what I to do now.

NO PROBLEM IM LEARNING MYSELF IF U NEED ANYTHING FEEL FREE TO HOLLER AT ME:devil:

98lowtahoe 05-04-2010 07:48 PM

Re: Tahoe C-Notch
 
If u need anything bro let me know again

Hart373 06-30-2017 02:26 AM

Re: Tahoe C-Notch
 
I know this is an old thread, but, I had some questions on a notch kit for a 98 2 door Tahoe. I have had her for 10+ years and she already has a flip kit and springs in the front. I have 2" drop spindles and 1" drop shakles coming for it from belltech. I have already ground out the bump stop brackets and was debating on if I needed to buy the notch kit, or if anyone has had any success with notching the frame without the kit, or had any better routes getting more clearance for the axle without dropping 3 bills? Also, does anyone run that low of a drop in their Tahoe with 20" wheels, if so, what series tire gives the best clearance in the front? Thanks for any help and info in advance.


All times are GMT -4. The time now is 04:31 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com