The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Got Rebuilt Engine and Transmission IN (https://67-72chevytrucks.com/vboard/showthread.php?t=3970)

69Custom 01-29-2001 12:13 AM

Got Rebuilt Engine and Transmission IN
 
I finally installed my rebuilt engine and transmission this weekend. Looks and sounds awesome and the performance is there too, except I need to replace the carb. It sucks.

Question though. I found out why my fuel guage isnt working. The wire from the sending unit isnt hooked up to anything. I looked for the same color and size one from the fuse terminal and cant find one. Does it change color. Also does the 83 oil guage use something for a sender unit. I put a 73 engine in and need to have a oil line run into the cab.

Thanks

Jerr


------------------
New Project
  • 69 Chevy SWB, 67 front clip, 4 wheel disc brakes, 350 with 5 spd. (current project)
  • 72 Blazer 4WD 307/3 spd, PS, PB, Posi (recent purchase)
  • 83 Chevy SWB 350/200r4, buckets (daily driver)



gchemist 01-29-2001 11:53 AM

69Custom,

The '83 trucks have an oil pressure sending unit next to the distributor. Looks like an upside down "fat top". The unit is screwed into the intake manifold. There is one wire connected to it. This wire runs back to the cab. I'm not sure of the wiring schematic for the fule gauage. I do have an original GM manual with diagrams. If could give me more details I could look at my book and try to give some more help.


------------------
Gerardo
1983 Custom Truck
TX Plates: "BAD BOW"
http://www.geocities.com/abetterchemist/

69Custom 01-29-2001 10:49 PM

Well, I put in a 73 350 which has a connection on the block itself in the back by the distributor. I have to use a after market gauge right now because of the oil line to go to the gauge.

As for the sending unit I have many wires cut in the engine compartment including the computer. I found the temp guage which was the green wire. I have a blue one, pink, tan, brown. The sending unit wire is brown, but the wire gauge is different from the brown that is coming out of the fire wall where the other wire are cut. Hope this information helps

Jerr

swervin ervin 01-30-2001 12:05 AM

On my 85 the tan wire is for the oil pressure sending unit. The pink wire is for the fuel level gauge.



------------------
Mike

1985 Chevy C-10
Mike's 73-87 Chevy Pickup Site

69Custom 01-30-2001 05:13 PM

Thanks, I will try them.

Jerr


All times are GMT -4. The time now is 04:09 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com