The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)

- - frame size (https://67-72chevytrucks.com/vboard/showthread.php?t=397479)

1970greenc10

04-14-2010 04:27 PM

frame size

Is a 69 chevy 1/2 ton 4X4 frame the same as a 69 GMC 3/4 ton 4X4 frame specifically the area from the rear axle back?
Thanks,Marty

Longhorn Man

04-14-2010 04:37 PM

Re: frame size

the metal is thicker on a 3/4 ton, but otherwise, they should be the same... maybe the hangers might differ a little.
I'm moving this to the 4X4 board, they know 4x4s better over there.

1970greenc10

04-14-2010 05:12 PM

Re: frame size

thanks a lot.
Marty

Blazer1970

04-14-2010 05:13 PM

Re: frame size

They are the same aside from the 3/4 ton being made from thicker material as Longhorn Man noted.

All times are GMT -4. The time now is 11:11 AM.