The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   VA Dolphin 6 gauge setup (https://67-72chevytrucks.com/vboard/showthread.php?t=399942)

VA72C10 04-29-2010 01:47 AM

Dolphin 6 gauge setup
 
Bought this setup to use with my cream leather buckets but am selling those now so I am going to end up with black gauges. New in the box never even removed to look at :chevy:
Tan with "chrome" (more like shiny silver paint) bezels. 6 gauge setup with mechanical gauges. Comes with required sending units including fuel sending unit.
200 shipped paid with paypal (plus fees)

http://i562.photobucket.com/albums/s...ctrical005.jpg
http://i562.photobucket.com/albums/s...ctrical006.jpg
Stock image....
http://i11.ebayimg.com/03/i/001/28/ca/4cbc_35.JPG

BrianV 04-30-2010 01:28 AM

Re: Dolphin 6 gauge setup
 
are those made to fit in the stock gage holes?

VA72C10 04-30-2010 07:59 AM

Re: Dolphin 6 gauge setup
 
I will have to check that. My plan was to use a glovebox door and custom mount them.

FeNiX 05-22-2010 09:59 PM

Re: Dolphin 6 gauge setup
 
what size are this?
Do you still have them?

VA72C10 05-23-2010 12:44 AM

Re: Dolphin 6 gauge setup
 
The larger two are 3 3/8 and the four smaller are 2 1/16"

VA72C10 05-25-2010 10:56 AM

Re: Dolphin 6 gauge setup
 
TTT 185 shipped FIRM

VA72C10 05-29-2010 01:20 PM

Re: Dolphin 6 gauge setup
 
ttt

VA72C10 06-01-2010 08:26 PM

Re: Dolphin 6 gauge setup
 
ttt

VA72C10 06-05-2010 12:20 AM

Re: Dolphin 6 gauge setup
 
175 shipped now...

VA72C10 06-05-2010 11:28 AM

Re: Dolphin 6 gauge setup
 
For TODAY only 160 shipped

junkyardjohn 06-05-2010 06:18 PM

Re: Dolphin 6 gauge setup
 
Is the fuel sending unit for a behind the seat tank, or if not what is the length of it?? (how deep of tank) & i assume it has a water temp. Sending unit? (3/8 or 1/2" npt?)

VA72C10 06-05-2010 07:02 PM

Re: Dolphin 6 gauge setup
 
Quote:

Originally Posted by junkyardjohn (Post 4015997)
Is the fuel sending unit for a behind the seat tank, or if not what is the length of it?? (how deep of tank) & i assume it has a water temp. Sending unit? (3/8 or 1/2" npt?)

14" length on the sender to the end of the float but it is made on a slider that you can cut the excess off and bend the float rod and cut that as desired.

Don't have a fitting to assure it but the sender looks like 1/4" but it comes with adapters up to 1/2".

VA72C10 06-06-2010 01:11 AM

Re: Dolphin 6 gauge setup
 
ttt

junkyardjohn 06-06-2010 11:21 PM

Re: Dolphin 6 gauge setup
 
SOMEBODY PLEASE BUY THESE BEFORE I'M FORCED TO BUY THEM. I DON'T EVEN NEED THEM, & I'M AN AUTOMETER FAN MYSELF BUT THESE ARE PURDY & THEY SURE SEEM TO BE BARGAIN PRICED.. TTT FOR YA SOMEONE?? :chevy: JOHN

VA72C10 06-07-2010 11:32 PM

Re: Dolphin 6 gauge setup
 
Quote:

Originally Posted by junkyardjohn (Post 4018198)
SOMEBODY PLEASE BUY THESE BEFORE I'M FORCED TO BUY THEM. I DON'T EVEN NEED THEM, & I'M AN AUTOMETER FAN MYSELF BUT THESE ARE PURDY & THEY SURE SEEM TO BE BARGAIN PRICED.. TTT FOR YA SOMEONE?? :chevy: JOHN

:agree: :chevy:

paul mora 06-08-2010 12:03 PM

Re: Dolphin 6 gauge setup
 
I can do 130.00 shipped they would look good in my old truck and it would be a great deal at this price.

junkyardjohn 06-08-2010 02:02 PM

Re: Dolphin 6 gauge setup
 
JFI.. I DID A LITTLE COMPARISON WITH AUTO-METER COMPAIRABLE KITS JUST FOR MY OWN INFO. AUTO-METER KITS COMPAIRABLE TO THIS ARE AROUND $280 MINUS THE TACH. WITCH IS ABOUT ANOTHER $100 & THEY DON'T COME WITH A NEW FUEL SENDING UNIT. 280 + 100 + SHIPPING. I DONT KNOW WHAT THE DOLPHIN SET GOES FOR (OR HAD ANY EXPERIANCE WITH THEM) & HAVE NEVER MET OR EVEN TALKED TO THIS GUY THATS SELLING THEM, BUT WITH $s BEING HARD TO COME BY IN THIS CRUMMY ECONOMY, BARGAINS & DEALS ON NON-ESSENTIAL PARTS & PROJECTS SEEM TO BE COMMING OUT OF THE WOODWORK AS PEOPLE NEED THE MONEY. I HAVE A SET OF A.M. ULTRA-LITES WITH A 5" TACH & SPEEDO (WITH THE ADDITION OF A TRAN.S TEMP GAGE) THAT I BUILT FOR MY ONGOING MONEY-PIT PROJECT THAT I PAID $550 FOR A FEW YEARS AGO. MAKE THIS SEEM LIKE A BARGAIN. MY THOUGHTS WERE TO EITHER HAVE SOMEONE TURN UP SOME ALUM. BEZELS TO MAKE THE 3 1/8" GAGES FIT IN A STOCK I-P, OR BUY ONE OF THE BLANK ONES THAT ARE ON EBAY ALL THE TIME. :chevy: JOHN

VA72C10 06-08-2010 03:12 PM

Re: Dolphin 6 gauge setup
 
150 shipped is the lowest I will go.

calvin78612 06-08-2010 04:12 PM

Re: Dolphin 6 gauge setup
 
I'll take em.150 shipped to 77301.Not sure how to do pay pal ?

VA72C10 06-08-2010 04:14 PM

Re: Dolphin 6 gauge setup
 
Quote:

Originally Posted by calvin78612 (Post 4020943)
I'll take em.150 shipped to 77301.Not sure how to do pay pal ?

do you have a paypal acct? If not I'll take a postal money order. pm sent with info.

decodan 06-08-2010 06:32 PM

Re: Dolphin 6 gauge setup
 
Hey,

If Calvin passes, I'll take them and Paypal right away.
Just let me know, Dan

VA72C10 06-08-2010 06:44 PM

Re: Dolphin 6 gauge setup
 
he said he's sending a postal money order today but if something happens I'll let you know.

paul mora 06-08-2010 08:35 PM

Re: Dolphin 6 gauge setup
 
Hi I thought we were working out a deal I offered you 130 you came back at 150. and I accept your counter offer. Let finish this and work out the payment.
Why are you selling to some one else

VA72C10 06-08-2010 11:31 PM

Re: Dolphin 6 gauge setup
 
Quote:

Originally Posted by paul mora (Post 4021415)
Hi I thought we were working out a deal I offered you 130 you came back at 150. and I accept your counter offer. Let finish this and work out the payment.
Why are you selling to some one else

because the forum rules state that the first to say they will take it gets it. Sorry.

decodan 06-08-2010 11:39 PM

Re: Dolphin 6 gauge setup
 
Hey,
Just keep me in line if something does not work or takes too long. I am not trying to jump in front but just wanted you to know I am ready if things don't work as they sometimes don't. My, " I'll take them" is firm and waiting my turn if it comes around to me.

Thanks, Dan


All times are GMT -4. The time now is 11:03 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com