Please help me with my front end
 

Ok, I started tearing down my 83' C10 SWB today and found something rather disturbing. To start with the truck sits within a 1/2 inch of level from side to side. But I found that the passenger side coil spring appears to have been heated while the drivers side hasn't. I also found a mysterious weld on my frame that just doesn't look right. Also there are a bunch of spacers on the drivers side upper control arm. Here are some pics.

In these first two you can see the spacers in the upper control arm and also the weld that goes all the way down the frame right in front of the control arms.

http://img8.imageshack.us/img8/3205/dsc00956wi.jpg
By claypool782 at 2010-05-05

http://img534.imageshack.us/img534/3103/dsc00957bo.jpg
By claypool782 at 2010-05-05

These last two show a measurement on each side from the bump stop base plat to the upper control arm. The passenger side is the first pic and is and 1 1/4 closer than the drivers side.

http://img245.imageshack.us/img245/7319/dsc00958gm.jpg
By claypool782 at 2010-05-05

http://img265.imageshack.us/img265/3664/dsc00959y.jpg
By claypool782 at 2010-05-05

Seems to me if I were to put stock springs in this thing the passenger side would sit higher than the drivers side indicating a bent frame(SAY IT ISNT SO) Also the weld looks like maybe a new end was welded onto the frame. Please let me know what you guys think. I sure hope I haven't been suckered into buying a wrecked up piece of crap. Thanks guys

Re: Please help me with my front end
 

That stack of shims worries me. I think I would get that thing to a frame/alignment shop and get it checked-out. Either the alignment is waay off or the frame is tweaked.

Re: Please help me with my front end
 

That stack of shims towards the front seems odd. I'd second the "take it to an alingment shop" statement. I'd go one further and say take it to a frame/axle shop and see that the deal is. Those welds are very oddly placed like maybe a cobbled frame repair. A frame and axle repair shop would be able to tell you better for sure.

Re: Please help me with my front end
 

Also, when you look at the truck from the front the sway bar has an obvious lean toward the passenger side while the body of the truck doesn't.

Re: Please help me with my front end
 

How much is it lowered? That would account for many of the shims. Jay

Re: Please help me with my front end
 

Not too sure. I don't think it is really lowered at all. it is only shimmed like that on the drivers side. I also noticed it is welded infront and behind the control arms on the drivers side. The frame horn on the drivers side appears to bee off an older truck. Like a 76' or something. It is more rounded at the front than just cut off at an angle like the passenger side.

Should an 81' frame be the same as an 83'. I found an 81 frame for a decent price.

Re: Please help me with my front end
 

definatly take it to a frame shop sound like a cob job fix

Re: Please help me with my front end
 

I going to guess that your frame was/is bent on that side. It looks like they put a new front rail on it from an earlier truck based on your description. Considering the shims and heated coil it looks like a back yard repair.

Sorry to say it don't look good. That's not saying it can't be made right, but I would look in to it before I went further.

Re: Please help me with my front end
 

Thought I would give you guys an update. Frame is definately twisted and has had a different front frame section welded onto the drivers side. It was welded on just behind the control arms and welded again right infront of them for some reason. I went through a whole range of pissed off emotions after discovering all this. After calming down and looking at my options this is what I have come up with.

I could never sell the truck because I would never sell a vehicle to someone under the false pretense that it was in good shape. I am jjust not like that.

I am not willing to take the hit and sell it off for parts.

So, that being said, I started searching craigslist for another truck. I guess I must be living right because I came across a rolling 81' swb frame in great shape for $150. I am going to go pick it up on Saturday.

So my small project looks like it will turn into a frame off project. No big deal, it will just take me a little longer to get it done. I am sure I will enjoy it though. Thanks for your help guys and I plan to start a build thread as soon as I get started.

Re: Please help me with my front end
 

This is Marvin that sold you the 81 frame. Hope everything works out for you like I said if you need anything else or have any questions let me know. Glad I could help you out.

Re: Please help me with my front end
 

Thanks again Marvin. My Dad shot me some pics of the frame and with a little clean-up and paint I think it is going to be perfect.

Re: Please help me with my front end
 

No problem at all thanks for getting it off my hands. I saw the pics of the frame in your build thread. Your truck looks good. Where are you guys drilling? I work in the oil field too.

Re: Please help me with my front end
 

I am working up by Alva, OK now. Should be in this area for the next year or so. I figured you were in the oilfield when you said you had to make a run to the panhandle the other day. There is absolutely no other reason to go there....lol