The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   TX Parting my 69 project, everything must go today (https://67-72chevytrucks.com/vboard/showthread.php?t=402960)

mplex2000 05-16-2010 12:01 PM

Parting my 69 project, everything must go today
 
Come on over and see, moving, must be out today, all prices are OBO buy more and get better pricing..

5137 Bay View Dr.
Keller, TX 76244

or call me if you need, 817-372-1771

Busy day but I'll do my best to get back to you guys - thanks!

Please note I was building a 69 truck, if I don't specify a year, I only know that it fits a 69, I'm sure you know if it fits yours or not - I am short on

time and won't have time to research it for you if you don't know - thanks.

1969 C10 SWB frame - blasted and painted/topcoated in POR-15
Includes upper/lower a-arms also blasted and painted, new ball joints and cross shafts - over $800 invested just in parts and labor
$400

1970 or 71? Cab - minimal dings, very little rust, needs outer rockers (replacements included), factory ac
I have a title but can't find it at the moment because I just moved - you can wait for it or file for lost title.
$300

67-70 McGauphy's 2.5" drop spidles with disc brakes, all hardware, new
$400

Bench Seat, needs recovered
$20

Adjustable rear track bar w/poly bushings
$25

7" dual diaphram brake booster (new)
$25

Energy Suspension - red poly cab + raditor support mounts - new
$40

Energy Suspension - 67-72 chevy truck trailing arm poly bushings
$20

Repro 69-72 radiator support, painted with por15 topcoat, new
$200

New rear brake hoses (soft lines)
$30

Corvette Style Master Cylinder new
$25

Aluminum brake prop valve new
$20

Inner and outer tie rods and adj sleeves, all new
$35

cab corners
$25

new gabriel front shocks with bolts
$20

new gabriel rear shocks with bolts
$20

POL tubular trans crossmember + trans mount, new
$100

POL tubular engine mount perches + eng mounts, new
$100

All new rear drum brakes - hardward, pads, drums etc
$50

5 lug axle - housing and axles ONLY no diff
$60

6 lug axle housing ONLY nothing else
$20

new front coil springs stock height
$60

new rear 4" drop springs
$60



Also have lots of misc parts - hood hinges, a few body pieces, A/C system parts, interior pieces

thelonerife 05-16-2010 12:07 PM

Re: Parting my 69 project, everything must go today
 
edit didn't need afterall

8mpg 05-16-2010 05:20 PM

Re: Parting my 69 project, everything must go today
 
So the fire sale truck is a member here. Someone posted up your link to your truck and that is why you got a TON of emails.

Im interested in the master cyl and the brake booster. I will try and call you today (Sunday)

Tim

mplex2000 05-16-2010 06:28 PM

Re: Parting my 69 project, everything must go today
 
Not sure what you're talking about 8mpg, I got 2 emails and the truck is going to scrap shortly, kind of sad.

Anybody that wants it might want to call, wife insists it's going within the hour :(

OARNGESI 05-16-2010 06:37 PM

Re: Parting my 69 project, everything must go today
 
IF YOUD SHIP Adjustable rear track bar w/poly bushings
$25 TO 85222 ILL BUY

8mpg 05-16-2010 06:40 PM

Re: Parting my 69 project, everything must go today
 
Called ya just now.

Tim

67Mach1 05-16-2010 06:54 PM

Re: Parting my 69 project, everything must go today
 
Sad that you had no time. Almost all of this would have sold and quickly if you had a week or so. Im down in Austin and could have used most of the suspension parts myself.

Sad indeed.

hatchaddict 05-16-2010 07:53 PM

Re: Parting my 69 project, everything must go today
 
what do you got for a/c stuff

jamie72 05-16-2010 08:26 PM

Re: Parting my 69 project, everything must go today
 
thats a shame, i see lots of stuff i would buy if it would be able to ship..

8mpg 05-16-2010 08:29 PM

Re: Parting my 69 project, everything must go today
 
Picked up a few parts from him...Nice guy. Really sad to see this stuff get scrapped. The frame is beautiful. If I didnt already ahve a powdercoated one, I would have taken it.

Gimme a call before you throw parts away, I will pick up the junk that is left over

ratrod67 05-16-2010 09:28 PM

Re: Parting my 69 project, everything must go today
 
What's your bottom dollar on the frame? Got a way to haul it?

POPO1984 05-16-2010 09:34 PM

Re: Parting my 69 project, everything must go today
 
Put me in line for all available brake parts pending shipping.

8mpg 05-17-2010 12:41 AM

Re: Parting my 69 project, everything must go today
 
Well guys... I basically cleared the rest of the parts out. Someone picked up the front brakes and control arms and I got the rest. I will probably be selling some really cheap stuff and giving away free parts so stay tuned. I picked up everything I could so it didnt get scrapped. Rather give it away than see it junked.

There is FREE step side bed sides with 1 fender. They are in pretty good shape. They are straight and need a bit of blasting, but definitely usable.

So DFW guys..if you need it, they will be at the curb tonight and tomorrow morning. Trash is going out, so get out there quick. I ahve no room to store it so I didnt pick them up.

dabruce15 05-17-2010 12:56 AM

Re: Parting my 69 project, everything must go today
 
In line for the track bar. How much to ship to 91311?

8mpg 05-17-2010 01:01 AM

Re: Parting my 69 project, everything must go today
 
I picked it up...and am going to use it

hatchaddict 05-17-2010 10:11 AM

Re: Parting my 69 project, everything must go today
 
a/c parts?

my67chevytruck 05-17-2010 10:19 AM

Re: Parting my 69 project, everything must go today
 
Damn Tim, i would of offered some Gas money to get me those bed parts. Wish i would of seen this yesterday i would have loaded up the car hauler....

8mpg 05-17-2010 10:59 AM

Re: Parting my 69 project, everything must go today
 
Quote:

Originally Posted by my67chevytruck (Post 3981264)
Damn Tim, i would of offered some Gas money to get me those bed parts. Wish i would of seen this yesterday i would have loaded up the car hauler....

Sorry man... if I knew they were still there, Id go get them right now. Im just not sure though. Dont know what time their trash comes by.

8mpg 05-17-2010 11:25 AM

Re: Parting my 69 project, everything must go today
 
Quote:

Originally Posted by hatchaddict (Post 3981255)
a/c parts?

Check my link here:
http://67-72chevytrucks.com/vboard/s...d.php?t=403140

I have all the a/c parts from him.

my67chevytruck 05-17-2010 11:53 AM

Re: Parting my 69 project, everything must go today
 
Quote:

Originally Posted by 8mpg (Post 3981322)
Sorry man... if I knew they were still there, Id go get them right now. Im just not sure though. Dont know what time their trash comes by.

No problem Tim. I should have been lazy yesterday and not worked on the truck, then i would have seen the ad :lol:

STINEY 05-17-2010 04:03 PM

Re: Parting my 69 project, everything must go today
 
I'll take these, if you can do shipping to 44820?

Energy Suspension - red poly cab + raditor support mounts - new
$40

new gabriel rear shocks with bolts
$20

VA72C10 05-17-2010 04:47 PM

Re: Parting my 69 project, everything must go today
 
Interested in all of this if not sold yet and you're willing to ship

Adjustable rear track bar w/poly bushings
$25

7" dual diaphram brake booster (new)
$25

Energy Suspension - red poly cab + raditor support mounts - new
$40

Energy Suspension - 67-72 chevy truck trailing arm poly bushings
$20

New rear brake hoses (soft lines)
$30

Corvette Style Master Cylinder new
$25

Aluminum brake prop valve new
$20

Inner and outer tie rods and adj sleeves, all new
$35

cab corners
$25

new gabriel front shocks with bolts
$20

new gabriel rear shocks with bolts
$20

POL tubular trans crossmember + trans mount, new
$100

POL tubular engine mount perches + eng mounts, new
$100

All new rear drum brakes - hardward, pads, drums etc
$50

new rear 4" drop springs
$60

8mpg 05-17-2010 04:49 PM

Re: Parting my 69 project, everything must go today
 
Quote:

Originally Posted by VA72C10 (Post 3981854)
Interested in all of this if not sold yet and you're willing to ship

Adjustable rear track bar w/poly bushings
$25

7" dual diaphram brake booster (new)
$25

Energy Suspension - red poly cab + raditor support mounts - new
$40

Energy Suspension - 67-72 chevy truck trailing arm poly bushings
$20

New rear brake hoses (soft lines)
$30

Corvette Style Master Cylinder new
$25

Aluminum brake prop valve new
$20

Inner and outer tie rods and adj sleeves, all new
$35

cab corners
$25

new gabriel front shocks with bolts
$20

new gabriel rear shocks with bolts
$20

POL tubular trans crossmember + trans mount, new
$100

POL tubular engine mount perches + eng mounts, new
$100

All new rear drum brakes - hardward, pads, drums etc
$50

new rear 4" drop springs
$60


might as well reply over ehre... I have the core support, master cyl, brake booster and prop valve, and am going to use it.
I also have the rear drum setup that Im willing to part with. Shipping is going to SUCK on that.

michael bustamante 05-17-2010 05:16 PM

Re: Parting my 69 project, everything must go today
 
i could sure use the trailing arm bushings, if theyre available

Clyde65 05-17-2010 05:49 PM

Re: Parting my 69 project, everything must go today
 
I also sent you an email through the CL add you had. a peoplepc.com email account.

Thank You


All times are GMT -4. The time now is 02:42 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com