The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   is this on right? carb? (https://67-72chevytrucks.com/vboard/showthread.php?t=403373)

sixbangr 05-18-2010 07:33 PM

is this on right? carb?
 
2 Attachment(s)
1964 with a 292. This does not look right, can't adjust the idle. The piece that screws to the back of the carb. It looks like the choke cable is hitting it.

LILRED66 05-19-2010 12:23 AM

Re: is this on right? carb?
 
I just did a swap for a reman carb on mine. I believe the tab for the choke cable was oriented differently...like your's is upside-down. You might try that first.

geezer#99 05-19-2010 06:45 PM

Re: is this on right? carb?
 
Finally had a look at mine between rain storms. It's close to being right.
The top part of the lever that is touching the choke cable needs to be on the back side of the choke arm. Easy fix. Un-screwit move it to back side. Then you'll see the bottom part of the lever come in contact with the idle screw.

sixbangr 05-19-2010 06:49 PM

Re: is this on right? carb?
 
Quote:

Originally Posted by geezer#99 (Post 3986025)
Finally had a look at mine between rain storms. It's close to being right.
The top part of the lever that is touching the choke cable needs to be on the back side of the choke arm. Easy fix. Un-screwit move it to back side. Then you'll see the bottom part of the lever come in contact with the idle screw.

thanks, took 5 minutes.


All times are GMT -4. The time now is 07:19 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com