The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevy/GMC Suburbans & Panels Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=38)

- - Reflector question (https://67-72chevytrucks.com/vboard/showthread.php?t=403979)

JoeKan

05-22-2010 05:21 PM

Reflector question

2 Attachment(s)

I'm putting my reflectors back on and I want to make sure they're on the right dirction. On one half, the reflector is smooth, the other half, there are ridges on it (my finger is pointing at it).
Can someone please tell me if the ridge side goes facing the front or the back?
Also, can someone tell me what size screw I need for the tail light lens and what length.
Thanks!
Joe

vectorit

05-22-2010 05:32 PM

Re: Reflector question

On my burb, I have the ridges on the reflectors pointed closest to the rear.
The screws are fine thread, and about an 1"1/2 long. I don't know the exact size, but the LMC catalog show's they sell them.

JoeKan

05-22-2010 06:08 PM

Re: Reflector question

Thank you. I install mine the same way.

JoeKan

06-04-2010 05:22 PM

Re: Reflector question

Does yours have a gasket around it? Mine didn't come with one but do you think one should be on it?

vectorit

06-04-2010 05:26 PM

Re: Reflector question

Your new ones should have come with a foam like gasket.
If there is no gasket, then water will get past them.

JoeKan

06-04-2010 07:49 PM

Re: Reflector question

Quote:

Originally Posted by vectorit (Post 4014294)

Your new ones should have come with a foam like gasket.
If there is no gasket, then water will get past them.

Thanks vectorit for the help. My old lens are still good so I'm going to use them. I just need to order new gaskets because when I bought the burb, it didn't have them.

All times are GMT -4. The time now is 12:23 AM.