lowered my truck! a little too much
 

http://i392.photobucket.com/albums/p...an9101/005.jpg
http://i392.photobucket.com/albums/p...an9101/006.jpg
http://i392.photobucket.com/albums/p...an9101/007.jpg

well i had the back lowered for a while then i got my spindles in today so i put those on then i cut the coils too much and bam im about a 1/4 of a inch from the inner fenders, took it out of my driveway drove up the street and it was hell hit the inner fenders on every little bump and had no turning radius, so i bought some new coils and just left the spindles in looks good now ill snap some pictures tommorow of it with new coils. i cut a whole coil out of the front and it went down way lower than i expected i loved the look but im not pulling inner fenders.

Re: lowered my truck! a little too much
 

Wow, thats a sharp truck.

Re: lowered my truck! a little too much
 

LOL I did the same thing.Coils just came in yesterday.I will put them in over the long weekend.

Re: lowered my truck! a little too much
 

It does look cool though. Did it hit at the top of the inner fender or the inner lip?

Re: lowered my truck! a little too much
 

you could have just went with smaller front tires

Re: lowered my truck! a little too much
 

yeah I think it looks good, just a shorter tire and call it good

Re: lowered my truck! a little too much
 

nice truck, but if it were mine i would remove that airdam.

just sayin

Re: lowered my truck! a little too much
 

yea when i get new tires i will probably throw 2 inch drop springs in the front these are about 31 inches tall.

Re: lowered my truck! a little too much
 

Go to your local wheel alignment guy and get a 3/8" rubber spacer and put it in the lower A arm pocket. That way you can raise back up to what you would want for daily use. Mine have been in there for 6 years.

Re: lowered my truck! a little too much
 

the air dam makes them look lower! imo

Re: lowered my truck! a little too much
 

X2 :smoke:


http://img254.imageshack.us/img254/4...ruck006hk6.jpg

Uploaded with ImageShack.us

Re: lowered my truck! a little too much
 

I found that the air dam is useful. It makes a negative pressure under the truck and removes the air that will build up in the wheel wells. That makes running at higher speeds easier for me. I kept mine just for that reason and I use the factory one, so that I don't have to spend a bunch of money repairing aftermarket fiberglass units.

Re: lowered my truck! a little too much
 

lower :-)

Re: lowered my truck! a little too much
 

Matt what size tires are you running? And what lowering components did you use. The truck looks sick!

Re: lowered my truck! a little too much
 

yeah it looks sic in the first pic. i woulda got smaller tires and the right bump stops to limit the travel and ran with it. the rake looks good, air dam makes it look lwer too like they say

Re: lowered my truck! a little too much
 

Remove the inner fenders & lower the rear more!!! Thay won't hit then ...

Ratty 46

Re: lowered my truck! a little too much
 

yes but he was having turning issues too so the yanking of the inners is a no go

Re: lowered my truck! a little too much
 

i have stock 16 inch wheels and the tires are about 31 inches tall.
and i cut 1 full coil off and used western chassis 3 inch drop spindles.

Re: lowered my truck! a little too much
 

here are the pics with the new springs.
http://i46.tinypic.com/333zc4n.jpg
http://i45.tinypic.com/e66grt.jpg
http://i50.tinypic.com/2mopezd.jpg
http://i50.tinypic.com/2mxfojl.jpg

Re: lowered my truck! a little too much
 

Looks good!

Re: lowered my truck! a little too much
 

my advice too coil cutters is.. do 1/4 coil at a time, install test, ride height.. repeat until ur happy with ride height... one full coil will be at least 2" drop. just sayin.

truck looks good!

Re: lowered my truck! a little too much
 

yep i learned the hard way lol

Re: lowered my truck! a little too much
 

why would you lower a 1 ton its pointless

Re: lowered my truck! a little too much
 

Mitch thanks for your negative comments, I will stop by next time I'm coming through goodland in my lowered 1ton towing a 24ft car trailer. Which is what the truck is intended to do.

Re: lowered my truck! a little too much
 

it looks good but i just have a problem with 2wds in general one tons sit up high so you can put a lot of crap in there if you lower it its useless and it will hit the ground if you put anything in there