73-80 K truck owners -- cab mount pics needed
 

Can anyone with a 73-80 K10/20 truck do me a solid and snap a couple of pics of the front cab mounts? I need to see if there's any washers or spacers that sit between the cab support and the upper rubber cushion, as well as any that may go below the lower cushion and bolt. Thanks for any help in advance.

Re: 73-80 K truck owners -- cab mount pics needed
 

Anyone?

Re: 73-80 K truck owners -- cab mount pics needed
 

Not pix, but diagram from 1973 service manual

Re: 73-80 K truck owners -- cab mount pics needed
 

ill have a pic shortly but basicly it is:

Bolt
Bolt top washer
Body
----------------------
Bushing top cone washer
Bushing top
-------------
Frame
-------------
Bushing bottom
Bushing bottom cone washer
------------------------
Nut through bolt

Is you have a metal washer above the bushing top cone washer
that is to lvl the body on the frame for whatever reason it is needed

Baron

Re: 73-80 K truck owners -- cab mount pics needed
 

Here

Re: 73-80 K truck owners -- cab mount pics needed
 

Kinda rusty, but here's the one on my 77 plow truck:

http://i175.photobucket.com/albums/w...w_truck_8b.jpg

When we restored dad's 77, we put all new mounts on that truck. If I remember correctly, each mount (upper & lower) had a built-in washer and tube/sleeve assembly molded into the rubber. No separate washers.

Re: 73-80 K truck owners -- cab mount pics needed
 

You basically tear out the washers from the rubber and use it with the new urethane bushings.