The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - bucket seats (https://67-72chevytrucks.com/vboard/showthread.php?t=408127)

I have a set of bucket seat out of an 1989 Suburban. What do I have to do to make the brackets/seats fit in my 1986 C-10?

Re: bucket seats

Quote:

Originally Posted by cheyenne402 (Post 4037128)

I have a set of bucket seat out of an 1989 Suburban. What do I have to do to make the brackets/seats fit in my 1986 C-10?

Did you manage to cut out the inner seat brackets that were welded to the floor? You will need these to install the buckets. You will also need to put the back half of the seat track in a big vise and bend them to the correct angle of the rear shelf. Use your benche seat tracks as a guide. The father-in-law did the same thing with my tracks