The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - backing plate/dust shield (https://67-72chevytrucks.com/vboard/showthread.php?t=409282)

Dapper Dan

06-26-2010 07:17 PM

backing plate/dust shield

Is it a problem to leave off the shield that bolts to the spindle behind the rotor? After two days I finally got my spindles installed only to turn around and see the drivers side shield laying in the grass. really hope I don't have to tear it back apart, Thanks.

joe231

06-26-2010 07:35 PM

Re: backing plate/dust shield

Ive seen plenty of people not run them, I don't think it will give you any problems, unless you are out muddin' ;)

Dapper Dan

06-26-2010 09:08 PM

Re: backing plate/dust shield

No plans to go muddin! That's a relief thanks for the quick reply

All times are GMT -4. The time now is 08:47 AM.