The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)

- - Tranny Crossmember for TH350 (https://67-72chevytrucks.com/vboard/showthread.php?t=412759)

5150	07-20-2010 09:40 AM

Tranny Crossmember for TH350

Hey guys,

What are some of you using for a crossmember on a TH350. I'm running a 250 inline and have a TH350 behind it. The PO has some homemade crap on there now, but it obviously won't work. What are you using?

http://i299.photobucket.com/albums/m...k/DSCF8314.jpg

DPowers

07-20-2010 12:39 PM

Re: Tranny Crossmember for TH350

Hey Bryan- I modified one from a late 70's camaro for my '66. You can also check this website out- it was for a 700r4- but could use it for the 350TH.

http://www.persh.org/pickup/700R4.htm

raycow

07-20-2010 02:21 PM

Re: Tranny Crossmember for TH350

Quote:

Originally Posted by 5150 (Post 4097837)

The PO has some homemade crap on there now, but it obviously won't work.

Why "obviously won't work"? I agree that it is not a thing of beauty, but what is wrong with it functionally that you think needs fixing?

Ray

my67chevytruck

07-20-2010 02:40 PM

Re: Tranny Crossmember for TH350

x2 on the camaro trans xmember.

5150	07-20-2010 07:04 PM

Re: Tranny Crossmember for TH350

I have no problem as long as it will work. This build is on the cheap anyway. As long as you think it will work, I'll keep it.

T Hilde

07-20-2010 07:42 PM

Re: Tranny Crossmember for TH350

The crossmember is factory, po modified. If you don't think there is enough cushion, re-fab the bracket and use a stock one.

All times are GMT -4. The time now is 05:16 PM.