e3 LevelPro + Big Red x4 ≈ 77 Air Square
 

.....more to come.

Re: e3 + Big Red x4 ≈ 77 Air Square
 

Very Nice.
Let me know how you like the new e3 setup.
I'm trying to decide if it's worth the money to upgrade.

Re: e3 + Big Red x4 ≈ 77 Air Square
 

Well worth the money we have used several since they came out.They work perfect.
Justin
www.scottshotrods.com

Re: e3 + Big Red x4 ≈ 77 Air Square
 

I'm calling Tony (at Air Ride Technologies) right now!;)

Re: e3 + Big Red x4 ≈ 77 Air Square
 

We have some nice deals on air ride tech products anybody intrested
let us know.
Justin
justin@scottshotrods.com

Re: e3 + Big Red x4 ≈ 77 Air Square
 

Nice upgrade Ken... can't wait for the install thread. :D

Re: e3 + Big Red x4 ≈ 77 Air Square
 

I thought you were already running Big Red's?

Re: e3 + Big Red x4 ≈ 77 Air Square
 

It's not an inexpensive upgrade, but it will resolve several issues for me. The one that prompted this is my desire to run dual compressors- "Dual Compressor Wiring" With the e3's ability to turn on the pumps at separate times, I really feel it will be less stress on the system. A bonus for me is the display. With the digital display I currently have loacted in my ashtray, I can not read the pressure at certain times when the sun is on it. This will eliminate that problem Thanks for taking good care of our members JustinAnd you know there will be an install thread. Actually a full blown article is in the works.You are correct. For future reference, I wanted to clarify what the system will consist of.

Maybe the title should be "e3 + Level Pro x4 ≈ 77 Air Square" or "e3 + Level Pro + Big Red x4 ≈ 77 Air Square

Re: e3 + Big Red x4 ≈ 77 Air Square
 

The beginning of the article is posted- LINK

Re: e3 + Big Red x4 ≈ 77 Air Square
 

Nice write up thus far... anxiously awaiting! :D

Re: e3 + Big Red x4 ≈ 77 Air Square
 

Im in...

Re: e3 + Big Red x4 ≈ 77 Air Square
 

Got the E-3 setup minus the level pro (i like to play with the ride height too much). Seems to be the hot set up, and thanks to Tony at Air Ride Technologies....very helpfull as allways!

Re: e3 + Big Red x4 ≈ 77 Air Square
 

Updated- LINK

Re: e3 LevelPro + Big Red x4 ≈ 77 Air Square
 

waiting to see how you are planning on attaching the ride height sensors...i need ideas

Re: e3 LevelPro + Big Red x4 ≈ 77 Air Square
 

Ken, I noticed in that last photo with the four bar at full droop, your two arms appear ( from the photo ) to look like thet are getting close to lining up in line or parallel with each orther. You have to make sure that they will not line up with each other even under axle articulation. If that happens it could very easily rotate over center and try to go the other way damaging the sensor. Looks like you could cheat and just extend your rod ends out a smidge more if you needed to.

Re: e3 LevelPro + Big Red x4 ≈ 77 Air Square
 

Tony it my be a bit of an illusion. I will double check before I make the final assembly. That just gave me a view of the travel and allowed me to determine a good mounting point for the lower bracket.

Re: e3 LevelPro + Big Red x4 ≈ 77 Air Square
 

Which ones? The rears are mounted. I plan to look at the front this evening.

Re: e3 LevelPro + Big Red x4 ≈ 77 Air Square
 

Started the front sensor install- LINK

Re: e3 LevelPro + Big Red x4 ≈ 77 Air Square
 

Dude... you *so* get on my envy button. :lol:

Re: e3 LevelPro + Big Red x4 ≈ 77 Air Square
 

What till you see what I do for my next trick. I'll let you in on it later tonight.

Re: e3 LevelPro + Big Red x4 ≈ 77 Air Square
 

In for the surprise ;)

Re: e3 LevelPro + Big Red x4 ≈ 77 Air Square
 

I didn't get as far as I would like to tonight. I worked late then stopped by the local hardware store to grab some supplies. I did get the drivers side shock off, and took some measurements.

I discovered the front shocks were rather worn so I plan to upgrade them. I decided to splurge and get the best that Ride Tech has to offer. I will be ordering a set of the Billet Adjustable (dual action) shocks from Tony on Thursday.

Re: e3 LevelPro + Big Red x4 ≈ 77 Air Square
 

purdy...

Re: e3 + Big Red x4 ≈ 77 Air Square
 

Hey Justin. I'm actually in the market for the e3 controller and ride height sensor wiring harness. Since I already have the ride height sensors. Can u quote me a price? Should I just call in and talk to u on the phone? Let me know.

I'm actually looking for retrotek Push button shifter too if u have any in stock.

Nick

Re: e3 LevelPro + Big Red x4 ≈ 77 Air Square
 

Looking good Ken, very nice upgrade!