The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - pressing in control arm bushings (https://67-72chevytrucks.com/vboard/showthread.php?t=413152)

JW76	07-22-2010 08:37 PM

pressing in control arm bushings

What is the best way to press in the lower control arm bushings? I don't have the special c-clamp tool like the old service book shows. I tried to push them through with an impact gun on the nuts of the cross shaft but it only pulls them in so far. Any ideas would be appreciated.

PRattenbury

07-22-2010 09:34 PM

Re: pressing in control arm bushings

I just bring em to a machinist and have him press them in with a hydraulic press

All times are GMT -4. The time now is 05:30 AM.