Anyway to get cruise with DBC?
 

What parts would I need or what mods need to be made in order to have cruise control with a DBC 01 LQ4 6.0. I know I would need the old cruise control turn signal stalk. Could Speartech modify my harness for this?

Re: Anyway to get cruise with DBC?
 

I would love to have this information too!

Re: Anyway to get cruise with DBC?
 

There is a write up some where, possibly on ls1tech where they used cable drive f body parts on a conversion to make it work.
Here
http://www.ls1tech.com/forums/conver...driven-tb.html
and here
http://www.thirdgen.org/techboard/lt...e-ltx-lsx.html

Hope this helps. Jay

Re: Anyway to get cruise with DBC?
 

I talked to John at Speartech and he said it can be done, just need to get the stalk and module.

Re: Anyway to get cruise with DBC?
 

What module?

Re: Anyway to get cruise with DBC?
 

This module, or controller. Whatever ya call it.

Re: Anyway to get cruise with DBC?
 

Thanks.

Re: Anyway to get cruise with DBC?
 

So....ya get that module( I assume it from the DBC donor), get a stalk for your column......and? wire it how?

what about if you have a 78 truck column with cruise already on the turn signal stalk?

I would LOVE to have cruise on my LSx truck!

Re: Anyway to get cruise with DBC?
 

Look at the links in my earlier post in this thread.
they explain it. Jay

Re: Anyway to get cruise with DBC?
 

i have that cruise module on my 6.0, might not use it.