lsx67
 

hey guys i havent ben here in years on this site, i got sidetrcked on another prodject and now back on my 67. i just got done with my 6.0l/4l65 swap and sold the 454. no more rat. lq9 with 228 cam,longtubes,underdrive crank, walbro 225 with cpp tank,and lots of other stuff i cant think of, i fabed everything myself ,so it took forever.it gets dynoed next week....let me know what u think, thanks all.....

Re: lsx67
 

Reeeaal Nice! Be sure and post the dyno results.

Re: lsx67
 

Nice install. Which headers are those and do they hang below the frame?

Re: lsx67
 

i used a stainless header made for silverado trucks, and the drivers side dips half way below the frame. thats the only thing i dont like about it due to one day im going air ride. i guess one day im going to have to go another route. i found other headers but they where coated. is there any other brand that hides in the frame that are stainless?

Re: lsx67
 

The F-body headers don't hang below the frame, but the drivers side kicks out a little towards the frame, so I cut it off and relocated the O2 sensor. Then I used ball-flange connectors so my exhaust can run parallel with the frame.

Re: lsx67
 

Which motor mounts did you use?

Re: lsx67
 

i bought the motor plates on ebay and used the clam shell mounts on the 73-up. the fbody headers sounds like an option, and i also am useing the ball flage socket setup and ill NEVER go back to a gasket. there sweet....

Re: lsx67
 

Saweeet! What kind of cold air intake is that? Or did you design yourself? Where did you det the long straight black 4" tube for it?

Re: lsx67
 

Super nice truck and install!

Re: lsx67
 

i did the intake myself and got the 4"tube on ebay and cut it down, then painted it black.