The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - 2wd/4wd tranny tunnel (https://67-72chevytrucks.com/vboard/showthread.php?t=415966)

Mr. Angry

08-10-2010 05:27 PM

2wd/4wd tranny tunnel

Anybody ever swapped a 4wd transmission tunnel into a 2wd cab? Both cabs are 1981-1987 so they have the non-removable tranny tunnel. I'm just wondering if anybody has actually done one before, and if they have some pics or even a procedure.

benoit454

08-10-2010 05:47 PM

Re: 2wd/4wd tranny tunnel

2wd stick shifts have the same high hump tunnel in them and ALL 4x4's have it. Shouldn't be a problem if you got a low tunnel and want a high one cut the low out and put the high hump on with screws or something so it's removalable.

Davidmichael

08-10-2010 08:19 PM

Re: 2wd/4wd tranny tunnel

If you do not want to cut the tunnel in, you can always go the body lift route but IMO I like trucks with out a body lift.

Mr. Angry

08-11-2010 01:30 PM

Re: 2wd/4wd tranny tunnel

Quote:

Originally Posted by Davidmichael (Post 4132726)

If you do not want to cut the tunnel in, you can always go the body lift route but IMO I like trucks with out a body lift.

I agree, I absolutely hate body lifts, they are hard on everything. I went through all the trouble to cut out the floorand firewall of my '83 Toyota pickup, so I could fit the SBC and 350/203 combo underneath everything without bodylift.:banghead:

All times are GMT -4. The time now is 04:07 AM.