I invented a new tool, and I'll share.
 

this has probably been thought of before, but I've never seen it. It seems too easy, but it works.

All you need is couple 1/2" washers, 2 small scrap pieces of metal, a big C clamp, a pair of vise grips, a welder, a hacksaw, and a tiny bit of brains.

Voila!!! Valve spring compressor(I recommend using the little plastic/rubber pad on the screw side to protect the bottom of the valve). Alternate version: don't include the washers, and you have an adjustable quick clamp.

Re: I invented a new tool, and I'll share.
 

I'm seeing a good welding clamp for some of the production parts I make. Very cool..

Re: I invented a new tool, and I'll share.
 

I just finished removing all my springs with my new tool. I did not have to use the little washer thing, but I did have to do a bit of grinding and drilling on the end of the clamp to get the retainers out. Worked like a charm!

Re: I invented a new tool, and I'll share.
 

do you have an actual pic? sounds cool

Re: I invented a new tool, and I'll share.
 

x2

Re: I invented a new tool, and I'll share.
 

Neat concept but they have been around for a while, did you make an actual prototype?

Re: I invented a new tool, and I'll share.
 

I did actually make one, but I haven't taken any pics yet. It worked great removing all my valve springs. I'll try to take pictures tomorrow.
Posted via Mobile Device

Re: I invented a new tool, and I'll share.
 

oh ok. ya, i was looking at the pic the first few seconds like, man this thing doesnt look real! lol, then i figured it out...it wasnt an actual pic..

Re: I invented a new tool, and I'll share.
 

You are correct. It is not an actual pic. For my day job, I do mechanical engineering and design on the computer. I ran out of work, so I did a model of my tool. I use SolidWorks and I am a CSWP if anyone cares.