Parting out 83 C10
 

I'm parting out my 83 C10. 250 L6, 3 Speed manual. Body is pretty beat up, most of the metal is rusted, except for the hood. The engine is dead, but the accesories are still good. The drive-train is still good (tranny needs shifter linkage work), rear end is stock, with 3.08's. Interior is ok, gauge cluster is good, along with what trim is in there. All the glass is good. Let me know if there is anything you need, I can get pics if needed. PM or e-mail fanman_2000@hotmail.com

got the stock AM FM radio?

Got a heater fan plug with pigtails on it? Hooks to rear of heater control panel in dash. Should connect directly to the back of the fan speed switch. Should have all contact in a line (4 wires I think, maybe 5). Youll know its the right one if the plug is NOT shaped like a T. Thanks, PM if you got it.

old Rusty C10: No I don't have the stock radio.

PHOENIX: I do have that plug (the one with the black, blue, red and yellow wires). Make an offer.

Does it have a passenger side tank? I need the gas tank filler neck hose holder.

gchemist: It has the single driver side tank. Sorry

What about the chrome trim around the grill? Mine's an '84 but have found on some slightly older models the trim is there and will fit overall size wise, but is different in shape. The older ones have a basic bevel shape. I only have the bottom piece (there's 4 pieces, top, bottom, and two end pieces) and mine is not just beveled. I think in '83 they went to the one like mine. Hard to explain, but if you took it off and hack sawed it in two and looked at it from the end, it's not just a smooth curve, kind of has a square ridge that sitcks out of it. Not sure if all models were that way or just the Custom Deluxe models. Anyway, if that's what yours is, what kind of shape is it in, and how much would you want.