The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Heater Help (https://67-72chevytrucks.com/vboard/showthread.php?t=4233)

cadpowered 11-20-2001 09:04 PM

Heater Help
 
I have an 80 GMC, short step, 4x4, (no air) that started blowing steam out of the heater/defroster today. I would guess the heater core is shot. Any tips or tricks on changing this puppy out??

gchemist 11-21-2001 10:52 AM

cadpowered.

Your heater core is definately shot if you have steam inside the cab. You can also smell the antifreeze. Changing the part is simple and straght forward. Just take your time. Part is fairly cheap too. Replace the hose clamps with screw driver type instead of the stock plier type. The change will help avoid leaks. Replace the hoses if necessary.

------------------
Gerardo
1983 Custom Truck
TX Plates: "BAD BOW"
http://www.geocities.com/abetterchemist/

powermad 11-21-2001 03:52 PM

Here is a link on heater core replacement.
heater core there are some steps in it that I don't do but it is a good tech article and explains it realy well.

------------------


All times are GMT -4. The time now is 04:09 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com