The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)

- - NY NP 208 Sensor (https://67-72chevytrucks.com/vboard/showthread.php?t=425295)

palposity

10-10-2010 01:20 PM

NP 208 Sensor

I have an NP208 Transfer case and I broke the electrical connector off of the sensor for it. This is the sensor that lights the 4x4 light on the dashboard. I went to NAPA, but they could not help me.

palposity

10-17-2010 01:54 PM

Re: NP 208 Sensor

Bump. Still need this.

Sarge261

10-17-2010 07:11 PM

Re: NP 208 Sensor

I think I have one of these. It goes through the floor? or is it part of the main harness, Either way I know I have a few of them...do you just need the connector with a little bit of wire or the whole harness.

Sarge

palposity

10-17-2010 07:47 PM

Re: NP 208 Sensor

Actually I have the harness that is fine, but it is the connector that screws into the top of the transfer case itself with the plug on it. If you have one of those that would be great!

Sarge261

10-18-2010 02:01 PM

Re: NP 208 Sensor

let me get a picture of so so we are sure we are talking about the same part for the 208

Sarge

All times are GMT -4. The time now is 09:46 AM.