The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - missing/cut frame (https://67-72chevytrucks.com/vboard/showthread.php?t=426965)

67 c10 guy

10-20-2010 01:44 AM

missing/cut frame

just wondering if anyone knows what these brackets/supports thesr are
the truck is a 1967 it origionally had a 6 cyl. im not sure if those were for mounting on the 6 but po replaced i6 for a v8 and cut those

thanks
eric

67 c10 guy

10-20-2010 01:45 AM

Re: missing/cut frame

2 Attachment(s)

pictures

project 67 sub

10-20-2010 01:56 AM

Re: missing/cut frame

looks like that was for the old manual trans crossmember, could be wrong though

red69ss

10-20-2010 08:36 AM

Re: missing/cut frame

Quote:

Originally Posted by project 67 sub (Post 4250193)

looks like that was for the old manual trans crossmember, could be wrong though

that looks like what the first pic is not sure on the second

w3lfd

10-20-2010 08:43 AM

Re: missing/cut frame

Could the second pic be part of a support for the old shift linkage?

67 c10 guy

10-20-2010 09:31 AM

Re: missing/cut frame

The second is the same as the pass. side but the auto shift linkage further back o the frAme. And if it is a man. Trans mount that would explain the patch in the floor of the cab
Posted via Mobile Device

P4B	10-20-2010 09:51 AM

Re: missing/cut frame

It's the original xmember for the manual trans. It would have to be moved further back to accomadate an automatic trans. Looks like the po took the easy way out.

Randy.

67 c10 guy

10-20-2010 10:02 AM

Re: missing/cut frame

Yeah the bar further back on the frame in the first
picture is the current auto trans mount
Posted via Mobile Device

All times are GMT -4. The time now is 08:16 PM.